From: Rafał Miłecki <rafal@xxxxxxxxxx>
BCM53573 has 2 Ethernet interfaces each connected to one of switch ports
in the default design. They both use fixed links.
An exception are Luxul XAP devices that have switch replaced by a single
PHY.
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
.../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 2 ++
.../arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 2 ++
arch/arm/boot/dts/broadcom/bcm53573.dtsi | 12 ++++++++++++
3 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
index e86e82be3c0e..ac44c745bdf8 100644
--- a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -50,6 +50,8 @@ &gmac0 {
phy-mode = "rgmii";
phy-handle = <&bcm54210e>;
+ /delete-node/ fixed-link;
+
mdio {
/delete-node/ switch@1e;
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
index d0bbc01f1806..fd071da26cfa 100644
--- a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
@@ -86,6 +86,8 @@ &gmac0 {
phy-mode = "rgmii";
phy-handle = <&bcm54210e>;
+ /delete-node/ fixed-link;
+
mdio {
/delete-node/ switch@1e;
diff --git a/arch/arm/boot/dts/broadcom/bcm53573.dtsi b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
index 10d0fe76ee3c..2df80740d181 100644
--- a/arch/arm/boot/dts/broadcom/bcm53573.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
@@ -181,6 +181,12 @@ ohci_port2: port@2 {
gmac0: ethernet@5000 {
reg = <0x5000 0x1000>;
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
mdio {
#address-cells = <1>;
@@ -237,6 +243,12 @@ port@8 {
gmac1: ethernet@b000 {
reg = <0xb000 0x1000>;
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
};
pmu@12000 {
--
2.35.3
