On Thu, Jul 20, 2023 at 06:00:15PM +0200, Andrew Lunn wrote: > > + motorcomm,rx-clk-drv-microamp: > > + description: | > > + drive strength of rx_clk rgmii pad. > > + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can > > + be configured with hardware pull-up resistors to match the SOC voltage > > + (usually 1.8V). > > + The software can read the registers to obtain the LDO voltage and configure > > + the legal drive strength(curren). > > + ===================================================== > > + | voltage | curren Available (uA) | > > current has a t. > > > + ===================================================== > > + | voltage | curren Available (uA) | > > Reviewed-by: Andrew Lunn <andrew@xxxxxxx> With the fixup, Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> Thanks, Conor.
Attachment:
signature.asc
Description: PGP signature
