> + motorcomm,rx-clk-drv-microamp:
> + description: |
> + drive strength of rx_clk rgmii pad.
> + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can
> + be configured with hardware pull-up resistors to match the SOC voltage
> + (usually 1.8V).
> + The software can read the registers to obtain the LDO voltage and configure
> + the legal drive strength(curren).
> + =====================================================
> + | voltage | curren Available (uA) |
current has a t.
> + =====================================================
> + | voltage | curren Available (uA) |
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Andrew
