On 2023/7/21 0:32, Conor Dooley wrote: > On Thu, Jul 13, 2023 at 07:38:53PM +0800, Xingyu Wu wrote: >> This patch serises are base on the basic JH7110 SYSCRG/AONCRG >> drivers and add new partial clock drivers and reset supports >> about System-Top-Group(STG), Image-Signal-Process(ISP) >> and Video-Output(VOUT) for the StarFive JH7110 RISC-V SoC. These >> clocks and resets could be used by DMA, VIN and Display modules. >> >> Patches 1 and 2 are about the System-Top-Group clock and reset >> generator(STGCRG) part. The first patch adds docunmentation to >> describe STG bindings, and the second patch adds clock driver to >> support STG clocks and resets as auxiliary device for JH7110. >> >> Patches 3 and 4 are about the Image-Signal-Process clock and reset >> gennerator(ISPCRG) part. The first patch adds docunmentation to >> describe ISP bindings, and the second patch adds clock driver to >> support ISP clocks and resets as auxiliary device for JH7110. >> And ISP clocks should power on and enable the SYSCRG clocks first >> before registering. >> >> Patches 5 and 6 are about the Video-Output clock and reset >> generator(VOUTCRG) part. The first patch adds docunmentation to >> describe VOUT bindings, and the second patch adds clock driver to >> support VOUT clocks and resets as auxiliary device for JH7110. >> And VOUT clocks also should power on and enable the SYSCRG clocks >> first before registering. >> >> Patch 7 adds struct members to support STG/ISP/VOUT resets. BTW, I found this patch is not in the linux-next or clk-next. These STG/ISP/VOUT CRG drivers are 'incomplete' without this resets patch. I don't know what your plans about this patch and I'm just curious on it. > >> Patch 8 adds external clocks which ISP and VOUT clock driver need. >> Patch 9 adds device node about STGCRG, ISPCRG and VOUTCRG to JH7110 dts. > > b4 did not detect this correctly, but I picked these 2 up too. > They should be in next tomorrow. Thanks to you. > > Please let your co-workers know that they should resend anything that I > didn't sent a thanks email for today, as it failed to apply (eg DMA, > eMMC). > Okay, I'll let them know and resent these patches. Best regards, Xingyu Wu
