On Tue, Jul 18, 2023 at 05:25:32PM +0000, Sahin, Okan wrote:
> >From: Nathan Chancellor <nathan@xxxxxxxxxx>
> >Sent: Tuesday, July 18, 2023 6:55 PM
> >To: Sahin, Okan <Okan.Sahin@xxxxxxxxxx>
> >Cc: Liam Girdwood <lgirdwood@xxxxxxxxx>; Mark Brown <broonie@xxxxxxxxxx>;
> >Rob Herring <robh+dt@xxxxxxxxxx>; Krzysztof Kozlowski
> ><krzysztof.kozlowski+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>; Tilki,
> >Ibrahim <Ibrahim.Tilki@xxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx;
> >devicetree@xxxxxxxxxxxxxxx; llvm@xxxxxxxxxxxxxxx
> >Subject: Re: [PATCH v3 2/2] regulator: max77857: Add ADI MAX77857/59/MAX77831
> >Regulator Support
> >
> >[External]
> >
> >Hi Okan,
> >
> >On Mon, Jul 17, 2023 at 08:07:35AM +0300, Okan Sahin wrote:
> >> Regulator driver for MAX77857/59 and MAX77831.
> >> The MAX77857 is a high-efficiency, high-performance
> >> buck-boost converter targeted for systems requiring
> >> a wide input voltage range (2.5V to 16V).
> >>
> >> The MAX77859 is high-Efficiency Buck-Boost Converter
> >> for USB-PD/PPS Applications. It has wide input range
> >> (2.5V to 22V)
> >>
> >> The MAX77831 is a high-efficiency, high-performance
> >> buck-boost converter targeted for systems requiring
> >> wide input voltage range (2.5V to 16V).
> >>
> >> Signed-off-by: Okan Sahin <okan.sahin@xxxxxxxxxx>
> >> ---
> >> drivers/regulator/Kconfig | 10 +
> >> drivers/regulator/Makefile | 1 +
> >> drivers/regulator/max77857-regulator.c | 459 +++++++++++++++++++++++++
> >> 3 files changed, 470 insertions(+)
> >> create mode 100644 drivers/regulator/max77857-regulator.c
> >>
> >> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> >> index e5f3613c15fa..09eaa1cd90de 100644
> >> --- a/drivers/regulator/Kconfig
> >> +++ b/drivers/regulator/Kconfig
> >> @@ -573,6 +573,16 @@ config REGULATOR_MAX77650
> >> Semiconductor. This device has a SIMO with three independent
> >> power rails and an LDO.
> >>
> >> +config REGULATOR_MAX77857
> >> + tristate "ADI MAX77857/MAX77831 regulator support"
> >> + depends on I2C
> >> + select REGMAP_I2C
> >> + help
> >> + This driver controls a ADI MAX77857 and MAX77831 regulators.
> >> + via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost
> >> + converters with input voltage range (2.5V to 16V). Say Y here to
> >> + enable the regulator driver
> >> +
> >> config REGULATOR_MAX8649
> >> tristate "Maxim 8649 voltage regulator"
> >> depends on I2C
> >> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> >> index 58dfe0147cd4..e7230846b680 100644
> >> --- a/drivers/regulator/Makefile
> >> +++ b/drivers/regulator/Makefile
> >> @@ -85,6 +85,7 @@ obj-$(CONFIG_REGULATOR_MAX77686) += max77686-
> >regulator.o
> >> obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
> >> obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
> >> obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o
> >> +obj-$(CONFIG_REGULATOR_MAX77857) += max77857-regulator.o
> >> obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
> >> obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
> >> obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
> >> diff --git a/drivers/regulator/max77857-regulator.c b/drivers/regulator/max77857-
> >regulator.c
> >> new file mode 100644
> >> index 000000000000..c5482ffd606e
> >> --- /dev/null
> >> +++ b/drivers/regulator/max77857-regulator.c
> >> @@ -0,0 +1,459 @@
> >> +// SPDX-License-Identifier: GPL-2.0-only
> >> +/*
> >> + * Copyright (c) 2023 Analog Devices, Inc.
> >> + * ADI Regulator driver for the MAX77857
> >> + * MAX77859 and MAX77831.
> >> + */
> >> +#include <linux/bitfield.h>
> >> +#include <linux/i2c.h>
> >> +#include <linux/interrupt.h>
> >> +#include <linux/module.h>
> >> +#include <linux/regmap.h>
> >> +#include <linux/regulator/driver.h>
> >> +#include <linux/regulator/machine.h>
> >> +#include <linux/regulator/of_regulator.h>
> >> +#include <linux/util_macros.h>
> >> +
> >> +#define MAX77857_REG_INT_SRC 0x10
> >> +#define MAX77857_REG_INT_MASK 0x11
> >> +#define MAX77857_REG_CONT1 0x12
> >> +#define MAX77857_REG_CONT2 0x13
> >> +#define MAX77857_REG_CONT3 0x14
> >> +
> >> +#define MAX77857_INT_SRC_OCP BIT(0)
> >> +#define MAX77857_INT_SRC_THS BIT(1)
> >> +#define MAX77857_INT_SRC_HARDSHORT BIT(2)
> >> +#define MAX77857_INT_SRC_OVP BIT(3)
> >> +#define MAX77857_INT_SRC_POK BIT(4)
> >> +
> >> +#define MAX77857_ILIM_MASK GENMASK(2, 0)
> >> +#define MAX77857_CONT1_FREQ GENMASK(4, 3)
> >> +#define MAX77857_CONT3_FPWM BIT(5)
> >> +
> >> +#define MAX77859_REG_INT_SRC 0x11
> >> +#define MAX77859_REG_CONT1 0x13
> >> +#define MAX77859_REG_CONT2 0x14
> >> +#define MAX77859_REG_CONT3 0x15
> >> +#define MAX77859_REG_CONT5 0x17
> >> +#define MAX77859_CONT2_FPWM BIT(2)
> >> +#define MAX77859_CONT2_INTB BIT(3)
> >> +#define MAX77859_CONT3_DVS_START BIT(2)
> >> +#define MAX77859_VOLTAGE_SEL_MASK GENMASK(9, 0)
> >> +
> >> +#define MAX77859_CURRENT_MIN 1000000
> >> +#define MAX77859_CURRENT_MAX 5000000
> >> +#define MAX77859_CURRENT_STEP 50000
> >> +
> >> +enum max77857_id {
> >> + ID_MAX77831 = 1,
> >> + ID_MAX77857,
> >> + ID_MAX77859,
> >> + ID_MAX77859A,
> >> +};
> >> +
> >> +static bool max77857_volatile_reg(struct device *dev, unsigned int reg)
> >> +{
> >> + enum max77857_id id = (enum max77857_id)dev_get_drvdata(dev);
> >> +
> >> + switch (id) {
> >> + case ID_MAX77831:
> >> + case ID_MAX77857:
> >> + return reg == MAX77857_REG_INT_SRC;
> >> + case ID_MAX77859:
> >> + case ID_MAX77859A:
> >> + return reg == MAX77859_REG_INT_SRC;
> >> + default:
> >> + return true;
> >> + }
> >> +}
> >> +
> >> +struct regmap_config max77857_regmap_config = {
> >> + .reg_bits = 8,
> >> + .val_bits = 8,
> >> + .cache_type = REGCACHE_MAPLE,
> >> + .volatile_reg = max77857_volatile_reg,
> >> +};
> >> +
> >> +static int max77857_get_status(struct regulator_dev *rdev)
> >> +{
> >> + unsigned int val;
> >> + int ret;
> >> +
> >> + ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + if (FIELD_GET(MAX77857_INT_SRC_POK, val))
> >> + return REGULATOR_STATUS_ON;
> >> +
> >> + return REGULATOR_STATUS_ERROR;
> >> +}
> >> +
> >> +static unsigned int max77857_get_mode(struct regulator_dev *rdev)
> >> +{
> >> + enum max77857_id id = (enum max77857_id)rdev_get_drvdata(rdev);
> >> + unsigned int regval;
> >> + int ret;
> >> +
> >> + switch (id) {
> >> + case ID_MAX77831:
> >> + case ID_MAX77857:
> >> + ret = regmap_read(rdev->regmap, MAX77857_REG_CONT3,
> >®val);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + if (FIELD_GET(MAX77857_CONT3_FPWM, regval))
> >> + return REGULATOR_MODE_FAST;
> >> +
> >> + break;
> >> + case ID_MAX77859:
> >> + case ID_MAX77859A:
> >> + ret = regmap_read(rdev->regmap, MAX77859_REG_CONT2,
> >®val);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + if (FIELD_GET(MAX77859_CONT2_FPWM, regval))
> >> + return REGULATOR_MODE_FAST;
> >> +
> >> + break;
> >> + default:
> >> + return -EINVAL;
> >> + }
> >> +
> >> + return REGULATOR_MODE_NORMAL;
> >> +}
> >> +
> >> +static int max77857_set_mode(struct regulator_dev *rdev, unsigned int mode)
> >> +{
> >> + enum max77857_id id = (enum max77857_id)rdev_get_drvdata(rdev);
> >> + unsigned int reg, val;
> >> +
> >> + switch (id) {
> >> + case ID_MAX77831:
> >> + case ID_MAX77857:
> >> + reg = MAX77857_REG_CONT3;
> >> + val = MAX77857_CONT3_FPWM;
> >> + break;
> >> + case ID_MAX77859:
> >> + case ID_MAX77859A:
> >> + reg = MAX77859_REG_CONT2;
> >> + val = MAX77859_CONT2_FPWM;
> >> + break;
> >> + default:
> >> + return -EINVAL;
> >> + }
> >> +
> >> + switch (mode) {
> >> + case REGULATOR_MODE_FAST:
> >> + return regmap_set_bits(rdev->regmap, reg, val);
> >> + case REGULATOR_MODE_NORMAL:
> >> + return regmap_clear_bits(rdev->regmap, reg, val);
> >> + default:
> >> + return -EINVAL;
> >> + }
> >> +}
> >> +
> >> +static int max77857_get_error_flags(struct regulator_dev *rdev,
> >> + unsigned int *flags)
> >> +{
> >> + unsigned int val;
> >> + int ret;
> >> +
> >> + ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + *flags = 0;
> >> +
> >> + if (FIELD_GET(MAX77857_INT_SRC_OVP, val))
> >> + *flags |= REGULATOR_ERROR_OVER_VOLTAGE_WARN;
> >> +
> >> + if (FIELD_GET(MAX77857_INT_SRC_OCP, val) ||
> >> + FIELD_GET(MAX77857_INT_SRC_HARDSHORT, val))
> >> + *flags |= REGULATOR_ERROR_OVER_CURRENT;
> >> +
> >> + if (FIELD_GET(MAX77857_INT_SRC_THS, val))
> >> + *flags |= REGULATOR_ERROR_OVER_TEMP;
> >> +
> >> + if (!FIELD_GET(MAX77857_INT_SRC_POK, val))
> >> + *flags |= REGULATOR_ERROR_FAIL;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static struct linear_range max77859_lin_ranges[] = {
> >> + REGULATOR_LINEAR_RANGE(3200000, 0x0A0, 0x320, 20000)
> >> +};
> >> +
> >> +static const unsigned int max77859_ramp_table[4] = {
> >> + 1000, 500, 250, 125
> >> +};
> >> +
> >> +static int max77859_set_voltage_sel(struct regulator_dev *rdev,
> >> + unsigned int sel)
> >> +{
> >> + __be16 reg;
> >> + int ret;
> >> +
> >> + reg = cpu_to_be16(sel);
> >> +
> >> + ret = regmap_bulk_write(rdev->regmap, MAX77859_REG_CONT3, ®, 2);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + /* actually apply new voltage */
> >> + return regmap_set_bits(rdev->regmap, MAX77859_REG_CONT3,
> >> + MAX77859_CONT3_DVS_START);
> >> +}
> >> +
> >> +int max77859_get_voltage_sel(struct regulator_dev *rdev)
> >> +{
> >> + __be16 reg;
> >> + int ret;
> >> +
> >> + ret = regmap_bulk_read(rdev->regmap, MAX77859_REG_CONT3, ®, 2);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + return FIELD_GET(MAX77859_VOLTAGE_SEL_MASK, __be16_to_cpu(reg));
> >> +}
> >> +
> >> +int max77859_set_current_limit(struct regulator_dev *rdev, int min_uA, int
> >max_uA)
> >> +{
> >> + u32 selector;
> >> +
> >> + if (max_uA < MAX77859_CURRENT_MIN)
> >> + return -EINVAL;
> >> +
> >> + selector = 0x12 + (max_uA - MAX77859_CURRENT_MIN) /
> >MAX77859_CURRENT_STEP;
> >> +
> >> + selector = clamp_val(selector, 0x00, 0x7F);
> >> +
> >> + return regmap_write(rdev->regmap, MAX77859_REG_CONT5, selector);
> >> +}
> >> +
> >> +int max77859_get_current_limit(struct regulator_dev *rdev)
> >> +{
> >> + u32 selector;
> >> + int ret;
> >> +
> >> + ret = regmap_read(rdev->regmap, MAX77859_REG_CONT5, &selector);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + if (selector <= 0x12)
> >> + return MAX77859_CURRENT_MIN;
> >> +
> >> + if (selector >= 0x64)
> >> + return MAX77859_CURRENT_MAX;
> >> +
> >> + return MAX77859_CURRENT_MIN + (selector - 0x12) *
> >MAX77859_CURRENT_STEP;
> >> +}
> >> +
> >> +static const struct regulator_ops max77859_regulator_ops = {
> >> + .list_voltage = regulator_list_voltage_linear_range,
> >> + .set_voltage_sel = max77859_set_voltage_sel,
> >> + .get_voltage_sel = max77859_get_voltage_sel,
> >> + .set_ramp_delay = regulator_set_ramp_delay_regmap,
> >> + .get_status = max77857_get_status,
> >> + .set_mode = max77857_set_mode,
> >> + .get_mode = max77857_get_mode,
> >> + .get_error_flags = max77857_get_error_flags,
> >> +};
> >> +
> >> +static const struct regulator_ops max77859a_regulator_ops = {
> >> + .list_voltage = regulator_list_voltage_linear_range,
> >> + .set_voltage_sel = max77859_set_voltage_sel,
> >> + .get_voltage_sel = max77859_get_voltage_sel,
> >> + .set_current_limit = max77859_set_current_limit,
> >> + .get_current_limit = max77859_get_current_limit,
> >> + .set_ramp_delay = regulator_set_ramp_delay_regmap,
> >> + .get_status = max77857_get_status,
> >> + .set_mode = max77857_set_mode,
> >> + .get_mode = max77857_get_mode,
> >> + .get_error_flags = max77857_get_error_flags,
> >> +};
> >> +
> >> +static const struct regulator_ops max77857_regulator_ops = {
> >> + .list_voltage = regulator_list_voltage_linear_range,
> >> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> >> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> >> + .set_ramp_delay = regulator_set_ramp_delay_regmap,
> >> + .get_status = max77857_get_status,
> >> + .set_mode = max77857_set_mode,
> >> + .get_mode = max77857_get_mode,
> >> + .get_error_flags = max77857_get_error_flags,
> >> +};
> >> +
> >> +static struct linear_range max77857_lin_ranges[] = {
> >> + REGULATOR_LINEAR_RANGE(4485000, 0x3D, 0xCC, 73500)
> >> +};
> >> +
> >> +static const unsigned int max77857_switch_freq[] = {
> >> + 1200000, 1500000, 1800000, 2100000
> >> +};
> >> +
> >> +static const unsigned int max77857_ramp_table[2][4] = {
> >> + { 1333, 667, 333, 227 }, /* when switch freq is 1.8MHz or 2.1MHz */
> >> + { 1166, 667, 333, 167 }, /* when switch freq is 1.2MHz or 1.5MHz */
> >> +};
> >> +
> >> +static struct regulator_desc max77857_regulator_desc = {
> >> + .ops = &max77857_regulator_ops,
> >> + .name = "max77857",
> >> + .linear_ranges = max77857_lin_ranges,
> >> + .n_linear_ranges = ARRAY_SIZE(max77857_lin_ranges),
> >> + .vsel_mask = 0xFF,
> >> + .vsel_reg = MAX77857_REG_CONT2,
> >> + .ramp_delay_table = max77857_ramp_table[0],
> >> + .n_ramp_values = ARRAY_SIZE(max77857_ramp_table[0]),
> >> + .ramp_reg = MAX77857_REG_CONT3,
> >> + .ramp_mask = GENMASK(1, 0),
> >> + .ramp_delay = max77857_ramp_table[0][0],
> >
> >This breaks the build with GCC 5.x through 7.x:
> >
> > drivers/regulator/max77857-regulator.c:312:16: error: initializer element is not
> >constant
> > .ramp_delay = max77857_ramp_table[0][0],
> > ^~~~~~~~~~~~~~~~~~~
> > drivers/regulator/max77857-regulator.c:312:16: note: (near initialization for
> >'max77857_regulator_desc.ramp_delay')
> >
> >and clang:
> >
> > drivers/regulator/max77857-regulator.c:312:16: error: initializer element is not a
> >compile-time constant
> > 312 | .ramp_delay = max77857_ramp_table[0][0],
> > | ^~~~~~~~~~~~~~~~~~~~~~~~~
> > 1 error generated.
> >
> >This relies on a GCC 8.x+ change that accepts more things as
> >compile-time constants, which is being worked on in clang
> >(https://urldefense.com/v3/__https://reviews.llvm.org/D76096__;!!A3Ni8CS0y2Y!4ql
> >noZFf_EVInN-
> >MaRDQWqOHb1SEbEqkwlU06PCt1Ngw6tE41ZEE24hnL1wBMsfotRCue4-i1VwD0xw$
> >). Since the kernel supports older
> >compilers, this will have to be worked around somehow. Perhaps a define
> >that can be used in both places?
> >
> >Cheers,
> >Nathan
> >
> >> + .owner = THIS_MODULE,
> >> +};
> >> +
> >> +static void max77857_calc_range(struct device *dev, enum max77857_id id)
> >> +{
> >> + struct linear_range *range;
> >> + unsigned long vref_step;
> >> + u32 rtop = 0;
> >> + u32 rbot = 0;
> >> +
> >> + device_property_read_u32(dev, "adi,rtop-ohms", &rtop);
> >> + device_property_read_u32(dev, "adi,rbot-ohms", &rbot);
> >> +
> >> + if (!rbot || !rtop)
> >> + return;
> >> +
> >> + switch (id) {
> >> + case ID_MAX77831:
> >> + case ID_MAX77857:
> >> + range = max77857_lin_ranges;
> >> + vref_step = 4900UL;
> >> + break;
> >> + case ID_MAX77859:
> >> + case ID_MAX77859A:
> >> + range = max77859_lin_ranges;
> >> + vref_step = 1250UL;
> >> + break;
> >> + }
> >> +
> >> + range->step = DIV_ROUND_CLOSEST(vref_step * (rbot + rtop), rbot);
> >> + range->min = range->step * range->min_sel;
> >> +}
> >> +
> >> +static int max77857_probe(struct i2c_client *client)
> >> +{
> >> + const struct i2c_device_id *i2c_id;
> >> + struct device *dev = &client->dev;
> >> + struct regulator_config cfg = { };
> >> + struct regulator_dev *rdev;
> >> + struct regmap *regmap;
> >> + enum max77857_id id;
> >> + u32 switch_freq = 0;
> >> + int ret;
> >> +
> >> + i2c_id = i2c_client_get_device_id(client);
> >> + if (!i2c_id)
> >> + return -EINVAL;
> >> +
> >> + id = i2c_id->driver_data;
> >> +
> >> + dev_set_drvdata(dev, (void *)id);
> >> +
> >> + if (id == ID_MAX77859 || id == ID_MAX77859A) {
> >> + max77857_regulator_desc.ops = &max77859_regulator_ops;
> >> + max77857_regulator_desc.linear_ranges = max77859_lin_ranges;
> >> + max77857_regulator_desc.ramp_delay_table =
> >max77859_ramp_table;
> >> + max77857_regulator_desc.ramp_delay = max77859_ramp_table[0];
> >> + }
> >> +
> >> + if (id == ID_MAX77859A)
> >> + max77857_regulator_desc.ops = &max77859a_regulator_ops;
> >> +
> >> + max77857_calc_range(dev, id);
> >> +
> >> + regmap = devm_regmap_init_i2c(client, &max77857_regmap_config);
> >> + if (IS_ERR(regmap))
> >> + return dev_err_probe(dev, PTR_ERR(regmap),
> >> + "cannot initialize regmap\n");
> >> +
> >> + device_property_read_u32(dev, "adi,switch-frequency-hz", &switch_freq);
> >> + if (switch_freq) {
> >> + switch_freq = find_closest(switch_freq, max77857_switch_freq,
> >> + ARRAY_SIZE(max77857_switch_freq));
> >> +
> >> + if (id == ID_MAX77831 && switch_freq == 3)
> >> + switch_freq = 2;
> >> +
> >> + switch (id) {
> >> + case ID_MAX77831:
> >> + case ID_MAX77857:
> >> + ret = regmap_update_bits(regmap, MAX77857_REG_CONT1,
> >> + MAX77857_CONT1_FREQ,
> >switch_freq);
> >> +
> >> + if (switch_freq >= 2)
> >> + break;
> >> +
> >> + max77857_regulator_desc.ramp_delay_table =
> >max77857_ramp_table[1];
> >> + max77857_regulator_desc.ramp_delay =
> >max77857_ramp_table[1][0];
> >> + break;
> >> + case ID_MAX77859:
> >> + case ID_MAX77859A:
> >> + ret = regmap_update_bits(regmap, MAX77859_REG_CONT1,
> >> + MAX77857_CONT1_FREQ,
> >switch_freq);
> >> + break;
> >> + }
> >> + if (ret)
> >> + return ret;
> >> + }
> >> +
> >> + cfg.dev = dev;
> >> + cfg.driver_data = (void *)id;
> >> + cfg.regmap = regmap;
> >> + cfg.init_data = of_get_regulator_init_data(dev, dev->of_node,
> >> + &max77857_regulator_desc);
> >> + if (!cfg.init_data)
> >> + return -ENOMEM;
> >> +
> >> + rdev = devm_regulator_register(dev, &max77857_regulator_desc, &cfg);
> >> + if (IS_ERR(rdev))
> >> + return dev_err_probe(dev, PTR_ERR(rdev),
> >> + "cannot register regulator\n");
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +const struct i2c_device_id max77857_id[] = {
> >> + { "max77831", ID_MAX77831 },
> >> + { "max77857", ID_MAX77857 },
> >> + { "max77859", ID_MAX77859 },
> >> + { "max77859a", ID_MAX77859A },
> >> + { }
> >> +};
> >> +MODULE_DEVICE_TABLE(i2c, max77857_id);
> >> +
> >> +static const struct of_device_id max77857_of_id[] = {
> >> + { .compatible = "adi,max77831", .data = (void *)ID_MAX77831 },
> >> + { .compatible = "adi,max77857", .data = (void *)ID_MAX77857 },
> >> + { .compatible = "adi,max77859", .data = (void *)ID_MAX77859 },
> >> + { .compatible = "adi,max77859a", .data = (void *)ID_MAX77859A },
> >> + { }
> >> +};
> >> +MODULE_DEVICE_TABLE(of, max77857_of_id);
> >> +
> >> +struct i2c_driver max77857_driver = {
> >> + .driver = {
> >> + .name = "max77857",
> >> + .of_match_table = max77857_of_id,
> >> + },
> >> + .id_table = max77857_id,
> >> + .probe_new = max77857_probe,
> >> +};
> >> +module_i2c_driver(max77857_driver);
> >> +
> >> +MODULE_DESCRIPTION("Analog Devices MAX77857 Buck-Boost Converter
> >Driver");
> >> +MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>");
> >> +MODULE_AUTHOR("Okan Sahin <Okan.Sahin@xxxxxxxxxx>");
> >> +MODULE_LICENSE("GPL");
> >> --
> >> 2.30.2
> >>
>
> Hi Nathan,
>
> Should I need to fix it within the patch v4? Or should I sent another patch after merge?
I do not believe Mark rebases his tree so he would not take a v4. It
will need to be a separate patch on top.
Cheers,
Nathan
