Hi Okan,
On Mon, Jul 17, 2023 at 08:07:35AM +0300, Okan Sahin wrote:
> Regulator driver for MAX77857/59 and MAX77831.
> The MAX77857 is a high-efficiency, high-performance
> buck-boost converter targeted for systems requiring
> a wide input voltage range (2.5V to 16V).
>
> The MAX77859 is high-Efficiency Buck-Boost Converter
> for USB-PD/PPS Applications. It has wide input range
> (2.5V to 22V)
>
> The MAX77831 is a high-efficiency, high-performance
> buck-boost converter targeted for systems requiring
> wide input voltage range (2.5V to 16V).
>
> Signed-off-by: Okan Sahin <okan.sahin@xxxxxxxxxx>
> ---
> drivers/regulator/Kconfig | 10 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/max77857-regulator.c | 459 +++++++++++++++++++++++++
> 3 files changed, 470 insertions(+)
> create mode 100644 drivers/regulator/max77857-regulator.c
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index e5f3613c15fa..09eaa1cd90de 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -573,6 +573,16 @@ config REGULATOR_MAX77650
> Semiconductor. This device has a SIMO with three independent
> power rails and an LDO.
>
> +config REGULATOR_MAX77857
> + tristate "ADI MAX77857/MAX77831 regulator support"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + This driver controls a ADI MAX77857 and MAX77831 regulators.
> + via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost
> + converters with input voltage range (2.5V to 16V). Say Y here to
> + enable the regulator driver
> +
> config REGULATOR_MAX8649
> tristate "Maxim 8649 voltage regulator"
> depends on I2C
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 58dfe0147cd4..e7230846b680 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -85,6 +85,7 @@ obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
> obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
> obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
> obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o
> +obj-$(CONFIG_REGULATOR_MAX77857) += max77857-regulator.o
> obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
> obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
> obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
> diff --git a/drivers/regulator/max77857-regulator.c b/drivers/regulator/max77857-regulator.c
> new file mode 100644
> index 000000000000..c5482ffd606e
> --- /dev/null
> +++ b/drivers/regulator/max77857-regulator.c
> @@ -0,0 +1,459 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2023 Analog Devices, Inc.
> + * ADI Regulator driver for the MAX77857
> + * MAX77859 and MAX77831.
> + */
> +#include <linux/bitfield.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/of_regulator.h>
> +#include <linux/util_macros.h>
> +
> +#define MAX77857_REG_INT_SRC 0x10
> +#define MAX77857_REG_INT_MASK 0x11
> +#define MAX77857_REG_CONT1 0x12
> +#define MAX77857_REG_CONT2 0x13
> +#define MAX77857_REG_CONT3 0x14
> +
> +#define MAX77857_INT_SRC_OCP BIT(0)
> +#define MAX77857_INT_SRC_THS BIT(1)
> +#define MAX77857_INT_SRC_HARDSHORT BIT(2)
> +#define MAX77857_INT_SRC_OVP BIT(3)
> +#define MAX77857_INT_SRC_POK BIT(4)
> +
> +#define MAX77857_ILIM_MASK GENMASK(2, 0)
> +#define MAX77857_CONT1_FREQ GENMASK(4, 3)
> +#define MAX77857_CONT3_FPWM BIT(5)
> +
> +#define MAX77859_REG_INT_SRC 0x11
> +#define MAX77859_REG_CONT1 0x13
> +#define MAX77859_REG_CONT2 0x14
> +#define MAX77859_REG_CONT3 0x15
> +#define MAX77859_REG_CONT5 0x17
> +#define MAX77859_CONT2_FPWM BIT(2)
> +#define MAX77859_CONT2_INTB BIT(3)
> +#define MAX77859_CONT3_DVS_START BIT(2)
> +#define MAX77859_VOLTAGE_SEL_MASK GENMASK(9, 0)
> +
> +#define MAX77859_CURRENT_MIN 1000000
> +#define MAX77859_CURRENT_MAX 5000000
> +#define MAX77859_CURRENT_STEP 50000
> +
> +enum max77857_id {
> + ID_MAX77831 = 1,
> + ID_MAX77857,
> + ID_MAX77859,
> + ID_MAX77859A,
> +};
> +
> +static bool max77857_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + enum max77857_id id = (enum max77857_id)dev_get_drvdata(dev);
> +
> + switch (id) {
> + case ID_MAX77831:
> + case ID_MAX77857:
> + return reg == MAX77857_REG_INT_SRC;
> + case ID_MAX77859:
> + case ID_MAX77859A:
> + return reg == MAX77859_REG_INT_SRC;
> + default:
> + return true;
> + }
> +}
> +
> +struct regmap_config max77857_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_MAPLE,
> + .volatile_reg = max77857_volatile_reg,
> +};
> +
> +static int max77857_get_status(struct regulator_dev *rdev)
> +{
> + unsigned int val;
> + int ret;
> +
> + ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val);
> + if (ret)
> + return ret;
> +
> + if (FIELD_GET(MAX77857_INT_SRC_POK, val))
> + return REGULATOR_STATUS_ON;
> +
> + return REGULATOR_STATUS_ERROR;
> +}
> +
> +static unsigned int max77857_get_mode(struct regulator_dev *rdev)
> +{
> + enum max77857_id id = (enum max77857_id)rdev_get_drvdata(rdev);
> + unsigned int regval;
> + int ret;
> +
> + switch (id) {
> + case ID_MAX77831:
> + case ID_MAX77857:
> + ret = regmap_read(rdev->regmap, MAX77857_REG_CONT3, ®val);
> + if (ret)
> + return ret;
> +
> + if (FIELD_GET(MAX77857_CONT3_FPWM, regval))
> + return REGULATOR_MODE_FAST;
> +
> + break;
> + case ID_MAX77859:
> + case ID_MAX77859A:
> + ret = regmap_read(rdev->regmap, MAX77859_REG_CONT2, ®val);
> + if (ret)
> + return ret;
> +
> + if (FIELD_GET(MAX77859_CONT2_FPWM, regval))
> + return REGULATOR_MODE_FAST;
> +
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return REGULATOR_MODE_NORMAL;
> +}
> +
> +static int max77857_set_mode(struct regulator_dev *rdev, unsigned int mode)
> +{
> + enum max77857_id id = (enum max77857_id)rdev_get_drvdata(rdev);
> + unsigned int reg, val;
> +
> + switch (id) {
> + case ID_MAX77831:
> + case ID_MAX77857:
> + reg = MAX77857_REG_CONT3;
> + val = MAX77857_CONT3_FPWM;
> + break;
> + case ID_MAX77859:
> + case ID_MAX77859A:
> + reg = MAX77859_REG_CONT2;
> + val = MAX77859_CONT2_FPWM;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + switch (mode) {
> + case REGULATOR_MODE_FAST:
> + return regmap_set_bits(rdev->regmap, reg, val);
> + case REGULATOR_MODE_NORMAL:
> + return regmap_clear_bits(rdev->regmap, reg, val);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int max77857_get_error_flags(struct regulator_dev *rdev,
> + unsigned int *flags)
> +{
> + unsigned int val;
> + int ret;
> +
> + ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val);
> + if (ret)
> + return ret;
> +
> + *flags = 0;
> +
> + if (FIELD_GET(MAX77857_INT_SRC_OVP, val))
> + *flags |= REGULATOR_ERROR_OVER_VOLTAGE_WARN;
> +
> + if (FIELD_GET(MAX77857_INT_SRC_OCP, val) ||
> + FIELD_GET(MAX77857_INT_SRC_HARDSHORT, val))
> + *flags |= REGULATOR_ERROR_OVER_CURRENT;
> +
> + if (FIELD_GET(MAX77857_INT_SRC_THS, val))
> + *flags |= REGULATOR_ERROR_OVER_TEMP;
> +
> + if (!FIELD_GET(MAX77857_INT_SRC_POK, val))
> + *flags |= REGULATOR_ERROR_FAIL;
> +
> + return 0;
> +}
> +
> +static struct linear_range max77859_lin_ranges[] = {
> + REGULATOR_LINEAR_RANGE(3200000, 0x0A0, 0x320, 20000)
> +};
> +
> +static const unsigned int max77859_ramp_table[4] = {
> + 1000, 500, 250, 125
> +};
> +
> +static int max77859_set_voltage_sel(struct regulator_dev *rdev,
> + unsigned int sel)
> +{
> + __be16 reg;
> + int ret;
> +
> + reg = cpu_to_be16(sel);
> +
> + ret = regmap_bulk_write(rdev->regmap, MAX77859_REG_CONT3, ®, 2);
> + if (ret)
> + return ret;
> +
> + /* actually apply new voltage */
> + return regmap_set_bits(rdev->regmap, MAX77859_REG_CONT3,
> + MAX77859_CONT3_DVS_START);
> +}
> +
> +int max77859_get_voltage_sel(struct regulator_dev *rdev)
> +{
> + __be16 reg;
> + int ret;
> +
> + ret = regmap_bulk_read(rdev->regmap, MAX77859_REG_CONT3, ®, 2);
> + if (ret)
> + return ret;
> +
> + return FIELD_GET(MAX77859_VOLTAGE_SEL_MASK, __be16_to_cpu(reg));
> +}
> +
> +int max77859_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA)
> +{
> + u32 selector;
> +
> + if (max_uA < MAX77859_CURRENT_MIN)
> + return -EINVAL;
> +
> + selector = 0x12 + (max_uA - MAX77859_CURRENT_MIN) / MAX77859_CURRENT_STEP;
> +
> + selector = clamp_val(selector, 0x00, 0x7F);
> +
> + return regmap_write(rdev->regmap, MAX77859_REG_CONT5, selector);
> +}
> +
> +int max77859_get_current_limit(struct regulator_dev *rdev)
> +{
> + u32 selector;
> + int ret;
> +
> + ret = regmap_read(rdev->regmap, MAX77859_REG_CONT5, &selector);
> + if (ret)
> + return ret;
> +
> + if (selector <= 0x12)
> + return MAX77859_CURRENT_MIN;
> +
> + if (selector >= 0x64)
> + return MAX77859_CURRENT_MAX;
> +
> + return MAX77859_CURRENT_MIN + (selector - 0x12) * MAX77859_CURRENT_STEP;
> +}
> +
> +static const struct regulator_ops max77859_regulator_ops = {
> + .list_voltage = regulator_list_voltage_linear_range,
> + .set_voltage_sel = max77859_set_voltage_sel,
> + .get_voltage_sel = max77859_get_voltage_sel,
> + .set_ramp_delay = regulator_set_ramp_delay_regmap,
> + .get_status = max77857_get_status,
> + .set_mode = max77857_set_mode,
> + .get_mode = max77857_get_mode,
> + .get_error_flags = max77857_get_error_flags,
> +};
> +
> +static const struct regulator_ops max77859a_regulator_ops = {
> + .list_voltage = regulator_list_voltage_linear_range,
> + .set_voltage_sel = max77859_set_voltage_sel,
> + .get_voltage_sel = max77859_get_voltage_sel,
> + .set_current_limit = max77859_set_current_limit,
> + .get_current_limit = max77859_get_current_limit,
> + .set_ramp_delay = regulator_set_ramp_delay_regmap,
> + .get_status = max77857_get_status,
> + .set_mode = max77857_set_mode,
> + .get_mode = max77857_get_mode,
> + .get_error_flags = max77857_get_error_flags,
> +};
> +
> +static const struct regulator_ops max77857_regulator_ops = {
> + .list_voltage = regulator_list_voltage_linear_range,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_ramp_delay = regulator_set_ramp_delay_regmap,
> + .get_status = max77857_get_status,
> + .set_mode = max77857_set_mode,
> + .get_mode = max77857_get_mode,
> + .get_error_flags = max77857_get_error_flags,
> +};
> +
> +static struct linear_range max77857_lin_ranges[] = {
> + REGULATOR_LINEAR_RANGE(4485000, 0x3D, 0xCC, 73500)
> +};
> +
> +static const unsigned int max77857_switch_freq[] = {
> + 1200000, 1500000, 1800000, 2100000
> +};
> +
> +static const unsigned int max77857_ramp_table[2][4] = {
> + { 1333, 667, 333, 227 }, /* when switch freq is 1.8MHz or 2.1MHz */
> + { 1166, 667, 333, 167 }, /* when switch freq is 1.2MHz or 1.5MHz */
> +};
> +
> +static struct regulator_desc max77857_regulator_desc = {
> + .ops = &max77857_regulator_ops,
> + .name = "max77857",
> + .linear_ranges = max77857_lin_ranges,
> + .n_linear_ranges = ARRAY_SIZE(max77857_lin_ranges),
> + .vsel_mask = 0xFF,
> + .vsel_reg = MAX77857_REG_CONT2,
> + .ramp_delay_table = max77857_ramp_table[0],
> + .n_ramp_values = ARRAY_SIZE(max77857_ramp_table[0]),
> + .ramp_reg = MAX77857_REG_CONT3,
> + .ramp_mask = GENMASK(1, 0),
> + .ramp_delay = max77857_ramp_table[0][0],
This breaks the build with GCC 5.x through 7.x:
drivers/regulator/max77857-regulator.c:312:16: error: initializer element is not constant
.ramp_delay = max77857_ramp_table[0][0],
^~~~~~~~~~~~~~~~~~~
drivers/regulator/max77857-regulator.c:312:16: note: (near initialization for 'max77857_regulator_desc.ramp_delay')
and clang:
drivers/regulator/max77857-regulator.c:312:16: error: initializer element is not a compile-time constant
312 | .ramp_delay = max77857_ramp_table[0][0],
| ^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
This relies on a GCC 8.x+ change that accepts more things as
compile-time constants, which is being worked on in clang
(https://reviews.llvm.org/D76096). Since the kernel supports older
compilers, this will have to be worked around somehow. Perhaps a define
that can be used in both places?
Cheers,
Nathan
> + .owner = THIS_MODULE,
> +};
> +
> +static void max77857_calc_range(struct device *dev, enum max77857_id id)
> +{
> + struct linear_range *range;
> + unsigned long vref_step;
> + u32 rtop = 0;
> + u32 rbot = 0;
> +
> + device_property_read_u32(dev, "adi,rtop-ohms", &rtop);
> + device_property_read_u32(dev, "adi,rbot-ohms", &rbot);
> +
> + if (!rbot || !rtop)
> + return;
> +
> + switch (id) {
> + case ID_MAX77831:
> + case ID_MAX77857:
> + range = max77857_lin_ranges;
> + vref_step = 4900UL;
> + break;
> + case ID_MAX77859:
> + case ID_MAX77859A:
> + range = max77859_lin_ranges;
> + vref_step = 1250UL;
> + break;
> + }
> +
> + range->step = DIV_ROUND_CLOSEST(vref_step * (rbot + rtop), rbot);
> + range->min = range->step * range->min_sel;
> +}
> +
> +static int max77857_probe(struct i2c_client *client)
> +{
> + const struct i2c_device_id *i2c_id;
> + struct device *dev = &client->dev;
> + struct regulator_config cfg = { };
> + struct regulator_dev *rdev;
> + struct regmap *regmap;
> + enum max77857_id id;
> + u32 switch_freq = 0;
> + int ret;
> +
> + i2c_id = i2c_client_get_device_id(client);
> + if (!i2c_id)
> + return -EINVAL;
> +
> + id = i2c_id->driver_data;
> +
> + dev_set_drvdata(dev, (void *)id);
> +
> + if (id == ID_MAX77859 || id == ID_MAX77859A) {
> + max77857_regulator_desc.ops = &max77859_regulator_ops;
> + max77857_regulator_desc.linear_ranges = max77859_lin_ranges;
> + max77857_regulator_desc.ramp_delay_table = max77859_ramp_table;
> + max77857_regulator_desc.ramp_delay = max77859_ramp_table[0];
> + }
> +
> + if (id == ID_MAX77859A)
> + max77857_regulator_desc.ops = &max77859a_regulator_ops;
> +
> + max77857_calc_range(dev, id);
> +
> + regmap = devm_regmap_init_i2c(client, &max77857_regmap_config);
> + if (IS_ERR(regmap))
> + return dev_err_probe(dev, PTR_ERR(regmap),
> + "cannot initialize regmap\n");
> +
> + device_property_read_u32(dev, "adi,switch-frequency-hz", &switch_freq);
> + if (switch_freq) {
> + switch_freq = find_closest(switch_freq, max77857_switch_freq,
> + ARRAY_SIZE(max77857_switch_freq));
> +
> + if (id == ID_MAX77831 && switch_freq == 3)
> + switch_freq = 2;
> +
> + switch (id) {
> + case ID_MAX77831:
> + case ID_MAX77857:
> + ret = regmap_update_bits(regmap, MAX77857_REG_CONT1,
> + MAX77857_CONT1_FREQ, switch_freq);
> +
> + if (switch_freq >= 2)
> + break;
> +
> + max77857_regulator_desc.ramp_delay_table = max77857_ramp_table[1];
> + max77857_regulator_desc.ramp_delay = max77857_ramp_table[1][0];
> + break;
> + case ID_MAX77859:
> + case ID_MAX77859A:
> + ret = regmap_update_bits(regmap, MAX77859_REG_CONT1,
> + MAX77857_CONT1_FREQ, switch_freq);
> + break;
> + }
> + if (ret)
> + return ret;
> + }
> +
> + cfg.dev = dev;
> + cfg.driver_data = (void *)id;
> + cfg.regmap = regmap;
> + cfg.init_data = of_get_regulator_init_data(dev, dev->of_node,
> + &max77857_regulator_desc);
> + if (!cfg.init_data)
> + return -ENOMEM;
> +
> + rdev = devm_regulator_register(dev, &max77857_regulator_desc, &cfg);
> + if (IS_ERR(rdev))
> + return dev_err_probe(dev, PTR_ERR(rdev),
> + "cannot register regulator\n");
> +
> + return 0;
> +}
> +
> +const struct i2c_device_id max77857_id[] = {
> + { "max77831", ID_MAX77831 },
> + { "max77857", ID_MAX77857 },
> + { "max77859", ID_MAX77859 },
> + { "max77859a", ID_MAX77859A },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max77857_id);
> +
> +static const struct of_device_id max77857_of_id[] = {
> + { .compatible = "adi,max77831", .data = (void *)ID_MAX77831 },
> + { .compatible = "adi,max77857", .data = (void *)ID_MAX77857 },
> + { .compatible = "adi,max77859", .data = (void *)ID_MAX77859 },
> + { .compatible = "adi,max77859a", .data = (void *)ID_MAX77859A },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max77857_of_id);
> +
> +struct i2c_driver max77857_driver = {
> + .driver = {
> + .name = "max77857",
> + .of_match_table = max77857_of_id,
> + },
> + .id_table = max77857_id,
> + .probe_new = max77857_probe,
> +};
> +module_i2c_driver(max77857_driver);
> +
> +MODULE_DESCRIPTION("Analog Devices MAX77857 Buck-Boost Converter Driver");
> +MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>");
> +MODULE_AUTHOR("Okan Sahin <Okan.Sahin@xxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> --
> 2.30.2
>
