Re: [PATCH] ARM: dts: hisilicon: Fix "status" values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 26, 2023 at 4:10 PM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> The defined value for "status" is "disabled", not "disable".
>
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)

Ping!

>
> diff --git a/arch/arm/boot/dts/hisilicon/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> index c524c854d319..a42b71cdc5d7 100644
> --- a/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> +++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> @@ -54,7 +54,7 @@ uart0: serial@12100000 {
>                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
>                         clock-names = "uartclk", "apb_pclk";
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 uart1: serial@12101000 {
> @@ -63,7 +63,7 @@ uart1: serial@12101000 {
>                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
>                         clock-names = "uartclk", "apb_pclk";
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 uart2: serial@12102000 {
> @@ -72,7 +72,7 @@ uart2: serial@12102000 {
>                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
>                         clock-names = "uartclk", "apb_pclk";
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 uart3: serial@12103000 {
> @@ -81,7 +81,7 @@ uart3: serial@12103000 {
>                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
>                         clock-names = "uartclk", "apb_pclk";
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 uart4: serial@12104000 {
> @@ -90,7 +90,7 @@ uart4: serial@12104000 {
>                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
>                         clock-names = "uartclk", "apb_pclk";
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 dual_timer0: timer@12000000 {
> @@ -100,7 +100,7 @@ dual_timer0: timer@12000000 {
>                         reg = <0x12000000 0x1000>;
>                         clocks = <&clk_3m>;
>                         clock-names = "apb_pclk";
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 dual_timer1: timer@12001000 {
> @@ -110,7 +110,7 @@ dual_timer1: timer@12001000 {
>                         reg = <0x12001000 0x1000>;
>                         clocks = <&clk_3m>;
>                         clock-names = "apb_pclk";
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 dual_timer2: timer@12002000 {
> @@ -120,7 +120,7 @@ dual_timer2: timer@12002000 {
>                         reg = <0x12002000 0x1000>;
>                         clocks = <&clk_3m>;
>                         clock-names = "apb_pclk";
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 spi_bus0: spi@12120000 {
> @@ -132,7 +132,7 @@ spi_bus0: spi@12120000 {
>                         num-cs = <1>;
>                         #address-cells = <1>;
>                         #size-cells = <0>;
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 spi_bus1: spi@12121000 {
> @@ -144,7 +144,7 @@ spi_bus1: spi@12121000 {
>                         num-cs = <1>;
>                         #address-cells = <1>;
>                         #size-cells = <0>;
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 spi_bus2: spi@12122000 {
> @@ -156,7 +156,7 @@ spi_bus2: spi@12122000 {
>                         num-cs = <1>;
>                         #address-cells = <1>;
>                         #size-cells = <0>;
> -                       status = "disable";
> +                       status = "disabled";
>                 };
>
>                 sysctrl: system-controller@12020000 {
> --
> 2.40.1
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux