The defined value for "status" is "disabled", not "disable".
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/hisilicon/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
index c524c854d319..a42b71cdc5d7 100644
--- a/arch/arm/boot/dts/hisilicon/hi3519.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
@@ -54,7 +54,7 @@ uart0: serial@12100000 {
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disable";
+ status = "disabled";
};
uart1: serial@12101000 {
@@ -63,7 +63,7 @@ uart1: serial@12101000 {
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disable";
+ status = "disabled";
};
uart2: serial@12102000 {
@@ -72,7 +72,7 @@ uart2: serial@12102000 {
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disable";
+ status = "disabled";
};
uart3: serial@12103000 {
@@ -81,7 +81,7 @@ uart3: serial@12103000 {
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disable";
+ status = "disabled";
};
uart4: serial@12104000 {
@@ -90,7 +90,7 @@ uart4: serial@12104000 {
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
clock-names = "uartclk", "apb_pclk";
- status = "disable";
+ status = "disabled";
};
dual_timer0: timer@12000000 {
@@ -100,7 +100,7 @@ dual_timer0: timer@12000000 {
reg = <0x12000000 0x1000>;
clocks = <&clk_3m>;
clock-names = "apb_pclk";
- status = "disable";
+ status = "disabled";
};
dual_timer1: timer@12001000 {
@@ -110,7 +110,7 @@ dual_timer1: timer@12001000 {
reg = <0x12001000 0x1000>;
clocks = <&clk_3m>;
clock-names = "apb_pclk";
- status = "disable";
+ status = "disabled";
};
dual_timer2: timer@12002000 {
@@ -120,7 +120,7 @@ dual_timer2: timer@12002000 {
reg = <0x12002000 0x1000>;
clocks = <&clk_3m>;
clock-names = "apb_pclk";
- status = "disable";
+ status = "disabled";
};
spi_bus0: spi@12120000 {
@@ -132,7 +132,7 @@ spi_bus0: spi@12120000 {
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
spi_bus1: spi@12121000 {
@@ -144,7 +144,7 @@ spi_bus1: spi@12121000 {
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
spi_bus2: spi@12122000 {
@@ -156,7 +156,7 @@ spi_bus2: spi@12122000 {
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
sysctrl: system-controller@12020000 {
--
2.40.1
