Hi, This series adds support for i.MX MIPI DSI DRM driver. Currently, the MIPI DSI driver only supports the burst with sync pulse mode. This series also includes a DRM panel driver for the Truly TFT480800-16-E panel which is driven by the Himax HX8369A driver IC. The driver IC data sheet could be found at [1]. As mentioned by the data sheet, the driver IC supports several interface modes. Currently, the DRM panel driver only supports the MIPI DSI video mode. New interface modes could be added later(perhaps, just like the way the DRM simple panel driver supports both MIPI DSI interface panels and simple(parallel) interface panels). The MIPI DSI feature is tested on i.MX6Q SabreSD board and i.MX6DL SabreSD board. The MIPI DSI display could be enabled directly on i.MX6Q SabreSD board after applying this series, because the 26.4MHz pixel clock the panel requires could be derived from the IPU HSP clock(264MHz) with an integer divider. On i.MX6DL SabreSD board, we need to manually disable the LVDS and HDMI displays in the device tree blob, since the i.MX6DL IPU HSP clock is 198MHz at present, which makes the pixel clock share the PLL5 video clock source with the LVDS and HDMI, thus, the panel cannot get the pixel clock rate it wants. Patch 01/15 is needed to get a precise pixel clock rate(26.4MHz) from the PLL5 video clock. If we don't have this patch, the pixel clock rate is about 20MHz, which causes a horitonal shift on the display image. This series can be applied on the drm-next branch. [1] http://www.allshore.com/pdf/Himax_HX8369-A.pdf Liu Ying (15): clk: divider: Correct parent clk round rate if no bestdiv is normally found of: Add vendor prefix for Himax Technologies Inc. of: Add vendor prefix for Truly Semiconductors Limited drm/dsi: Do not add DSI devices for the child nodes with input-port property ARM: dts: imx6qdl: Add input-port property to MIPI DSI node's CTRC child nodes ARM: dts: imx6q: Add MIPI DSI remote end points for IPU2 DI0/1 end points ARM: imx6q: Add GPR3 MIPI muxing control register field shift bits definition ARM: imx6q: clk: Add the video_27m clock drm: imx: Add MIPI DSI host controller driver drm: panel: Add support for Himax HX8369A MIPI DSI panel ARM: dtsi: imx6qdl: Add support for MIPI DSI host controller ARM: dts: imx6qdl-sabresd: Add support for TRULY TFT480800-16-E MIPI DSI panel ARM: imx_v6_v7_defconfig: Cleanup for imx drm being moved out of staging ARM: imx_v6_v7_defconfig: Add support for MIPI DSI host controller ARM: imx_v6_v7_defconfig: Add support for Himax HX8369A panel .../devicetree/bindings/drm/imx/mipi_dsi.txt | 81 ++ .../devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt | 4 + .../devicetree/bindings/panel/himax,hx8369a.txt | 86 ++ .../devicetree/bindings/vendor-prefixes.txt | 2 + arch/arm/boot/dts/imx6q.dtsi | 4 + arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 41 + arch/arm/boot/dts/imx6qdl.dtsi | 9 + arch/arm/configs/imx_v6_v7_defconfig | 17 +- arch/arm/mach-imx/clk-imx6q.c | 1 + drivers/clk/clk-divider.c | 3 +- drivers/gpu/drm/drm_mipi_dsi.c | 5 +- drivers/gpu/drm/imx/Kconfig | 6 + drivers/gpu/drm/imx/Makefile | 1 + drivers/gpu/drm/imx/imx-mipi-dsi.c | 1017 ++++++++++++++++++++ drivers/gpu/drm/panel/Kconfig | 6 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-hx8369a.c | 627 ++++++++++++ include/dt-bindings/clock/imx6qdl-clock.h | 3 +- include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 1 + 19 files changed, 1903 insertions(+), 12 deletions(-) create mode 100644 Documentation/devicetree/bindings/drm/imx/mipi_dsi.txt create mode 100644 Documentation/devicetree/bindings/panel/himax,hx8369a.txt create mode 100644 drivers/gpu/drm/imx/imx-mipi-dsi.c create mode 100644 drivers/gpu/drm/panel/panel-hx8369a.c -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
