Re: [PATCH 15/15] arm64: dts: qcom: sm6115: Add VDD_CX to GPU_CCC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18.07.2023 06:25, Bjorn Andersson wrote:
> On Mon, Jul 17, 2023 at 07:11:33PM +0200, Konrad Dybcio wrote:
>> On 17.07.2023 18:56, Stephan Gerhold wrote:
>>> On Mon, Jul 17, 2023 at 06:50:18PM +0200, Konrad Dybcio wrote:
>>>> On 17.07.2023 18:28, Stephan Gerhold wrote:
>>>>> On Mon, Jul 17, 2023 at 05:19:22PM +0200, Konrad Dybcio wrote:
>>>>>> The GPU_CC block is powered by VDD_CX. Describe that.
>>>>>>
>>>>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>>>>>> ---
>>>>>>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 2 ++
>>>>>>  1 file changed, 2 insertions(+)
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
>>>>>> index 29b5b388cd94..bfaaa1801a4d 100644
>>>>>> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
>>>>>> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
>>>>>> @@ -1430,6 +1430,8 @@ gpucc: clock-controller@5990000 {
>>>>>>  			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
>>>>>>  				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
>>>>>>  				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
>>>>>> +			power-domains = <&rpmpd SM6115_VDDCX>;
>>>>>> +			required-opps = <&rpmpd_opp_low_svs>;
>>>>>
>>>>> Where is this required-opp coming from? The clocks in gpucc seem to have
>>>>> different voltage requirements depending on the rates, but we usually
>>>>> handle that in the OPP tables of the consumer.
>>>> The only lower levels defined for this SoC are VDD_MIN and VDD_RET,
>>>> but quite obviously the GPU won't work then
>>>>
>>>
>>> The levels needed for the GPU clocks to run should be in the GPU OPP
>>> table though, just like e.g. sdhc2_opp_table for the SDCC clocks.
>>>
>>> I still don't really understand why this is specified here. :)
>> The GPU_CC block needs this rail to be at a certain power level for
>> register access. This describes that requirement.
>>
> 
> And that is not the lowest level reported by command db?
> Please describe this part in the commit message as well.
command-what? ;)

RPM exports VDD_NONE (off), VDD_MIN (the lowest state before collapse)
and then low_svs is usually the lowest "actually on" state for all
consumers.

Konrad



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux