Hi, as before thanks for any feedback. This series adds initial support for TQMa93xxLA soldered on MBa93xxLA. As the name indicates this is an i.MX93 based SBC board. The initial support includes typical interfaces like UART, eMMC, I2C, Ethernet. Support for USB, LVDS and PMIC is still pending, which require additional patches. Patch 1 adds the compatible to dt bindings Patch 2 adds .dts[i] files for module and sbc board support Patch 3 adds more i.MX93 drivers to arm64 defconfig As the question occurred: xx in TQMa9xx is an actual wildcard indicating the mounted SoC, while xx in MBa9xx is part of the regular name of the mainboard. There is an ordering number called MBa9352, but this is just indicating the soldered module, the mainboard is still MBa93xx. Changes in v3: * Rebase to next-20230718 * Collected Krzysztof's A-b on Patch 1 * Renamed fixed clock name (for DSI-DP bridge input) * Sorted properties to name vendor specific ones below common ones * Add missing properties for DSI-DP bridge, update compatible as well * Add missing pinctrl settings for DSI-DP bridge * Move compatible first for QSPI flash node Changes in v2: * Fix dt-bindings patch subject Best regards, Alexander Alexander Stein (2): arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board arm64: defconfig: Enable i.MX93 devices Markus Niebel (1): dt-bindings: arm: add TQMa93xxLA SOM .../devicetree/bindings/arm/fsl.yaml | 19 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../freescale/imx93-tqma9352-mba93xxla.dts | 641 ++++++++++++++++++ .../boot/dts/freescale/imx93-tqma9352.dtsi | 213 ++++++ arch/arm64/configs/defconfig | 4 + 5 files changed, 878 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts create mode 100644 arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi -- 2.34.1
