Hi, On Wednesday 10 December 2014 06:24 AM, Ray Jui wrote:
Document the I2C device tree binding for Broadcom iProc family of SoCs Signed-off-by: Ray Jui <rjui@xxxxxxxxxxxx> Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx> --- .../devicetree/bindings/i2c/brcm,iproc-i2c.txt | 37 ++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt new file mode 100644 index 0000000..81f982c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt @@ -0,0 +1,37 @@ +Broadcom iProc I2C controller + +Required properties: + +- compatible: + Must be "brcm,iproc-i2c" + +- reg: + Define the base and range of the I/O address space that contain the iProc + I2C controller registers + +- interrupts: + Should contain the I2C interrupt + +- clock-frequency: + This is the I2C bus clock. Need to be either 100000 or 400000 + +- #address-cells: + Always 1 (for I2C addresses) + +- #size-cells: + Always 0 +
All the properties defined with two lines of statements. Why cant they be with single line statement, like: compatible: Must be "brcm,iproc-i2c" reg: Define the base and range of the I/O address space that contain the iProc I2C controller registers .... -- Thanks and Regards, Varka Bhadram. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html