-------- 原始信息 -------- 主题: Re: [PATCH v4 1/2] dt-bindings: net: motorcomm: Add pad driver strength cfg From: Andrew Lunn <andrew@xxxxxxx> 收件人: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx> 日期: 2023/7/15 >> + motorcomm,rx-clk-driver-strength: >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: | >> + drive strength of rx_clk rgmii pad. >> + |----------------------------------| >> + | rx_clk ds map table | >> + |----------------------------------| >> + | DS(3b) | wol@1.8v | wol@3.3v | >> + |________|_________________________| >> + | | current(uA)| current(uA)| >> + | 000 | 1200 | 3070 | >> + | 001 | 2100 | 4080 | >> + | 010 | 2700 | 4370 | >> + | 011 | 2910 | 4680 | >> + | 100 | 3110 | 5020 | >> + | 101 | 3600 | 5450 | >> + | 110 | 3970 | 5740 | >> + | 111 | 4350 | 6140 | >> + |--------|------------|------------| >> + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, >> + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] >> + default: 2910 > > The DS(3b) value is not relevant to the binding. It is a driver > detail. So i would not bother listing it. > ok， will remove it. > Please add a comment explaining what wol is. > > Andrew Sorry，it should be vol (voltage), not wol. Best regards, Samin
