The motorcomm phy (YT8531) supports the ability to adjust the drive strength of the rx_clk/rx_data, and the default strength may not be suitable for all boards. So add configurable options to better match the boards.(e.g. StarFive VisionFive 2) The first patch adds a description of dt-bingding, and the second patch adds YT8531's parsing and settings for pad-driver-strength-cfg. Changes since v3: Patch 1: - Used current values instead of register values - Added units and numerical descriptions of driver-strength Patch 2: - Added a lookup table to listing the valid values in the schema (by Andrew Lunn) Changes since v2: Patch 2: - Readjusted the order of YT8531_RGMII_xxx to below YTPHY_PAD_DRIVE_STRENGTH_REG (by Frank Sae) - Reversed Christmas tree, sort these longest first, shortest last (by Andrew Lunn) - Rebased on tag v6.4 Changes since v1: Patch 1: - Renamed "rx-xxx-driver-strength" to "motorcomm,rx-xxx-driver-strength" (by Frank Sae) Patch 2: - Added default values for rxc/rxd driver strength (by Frank Sea/Andrew Lunn) - Added range checking when val is in DT (by Frank Sea/Andrew Lunn) Previous versions: v1 - https://patchwork.kernel.org/project/netdevbpf/cover/20230426063541.15378-1-samin.guo@xxxxxxxxxxxxxxxx v2 - https://patchwork.kernel.org/project/netdevbpf/cover/20230505090558.2355-1-samin.guo@xxxxxxxxxxxxxxxx v3 - https://patchwork.kernel.org/project/netdevbpf/cover/20230526090502.29835-1-samin.guo@xxxxxxxxxxxxxxxx Samin Guo (2): dt-bindings: net: motorcomm: Add pad driver strength cfg net: phy: motorcomm: Add pad drive strength cfg support .../bindings/net/motorcomm,yt8xxx.yaml | 46 +++++++ drivers/net/phy/motorcomm.c | 114 ++++++++++++++++++ 2 files changed, 160 insertions(+) base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5 -- 2.17.1