On 16.06.2023 10:32, Sridharan S N wrote: > Add support for wlan-2g LED on GPIO 64. > > Signed-off-by: Sridharan S N <quic_sridsn@xxxxxxxxxxx> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Konrad > Changes in V4: > - Added patch dependency. This change depends on below patch set > https://lore.kernel.org/linux-arm-msm/20230614085040.22071-2-quic_anusha@xxxxxxxxxxx/ > > Changes in V3: > - Updated patch series title. Mentioned platform in series > title > > Changes in V2: > - No changes > > .../boot/dts/qcom/ipq9574-rdp-common.dtsi | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi > index fd5326dc1773..25424cecd834 100644 > --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi > @@ -34,6 +34,18 @@ > debounce-interval = <60>; > }; > }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-0 = <&gpio_leds_default>; > + pinctrl-names = "default"; > + > + led-0 { > + gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "phy0tx"; > + default-state = "off"; > + }; > + }; > }; > > &blsp1_spi0 { > @@ -137,6 +149,14 @@ > drive-strength = <8>; > bias-pull-up; > }; > + > + gpio_leds_default: gpio-leds-default-state { > + pins = "gpio64"; > + function = "gpio"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > }; > > &xo_board_clk {
