On Tue, 4 Jul 2023 at 08:49, Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx> wrote:
>
> Add driver for the StarFive JH7110 PLL clock controller
> and they work by reading and setting syscon registers.
>
> Co-developed-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
> Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
Thanks for using my changes! I'll add my r-b for Conor, but since I'm
also a co-developer it's fine to leave it out if you resubmit.
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
> ---
> MAINTAINERS | 6 +
> drivers/clk/starfive/Kconfig | 8 +
> drivers/clk/starfive/Makefile | 1 +
> .../clk/starfive/clk-starfive-jh7110-pll.c | 507 ++++++++++++++++++
> 4 files changed, 522 insertions(+)
> create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-pll.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 58ba04bd0bc8..b59b4d217991 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20127,6 +20127,12 @@ S: Supported
> F: Documentation/devicetree/bindings/mmc/starfive*
> F: drivers/mmc/host/dw_mmc-starfive.c
>
> +STARFIVE JH7110 PLL CLOCK DRIVER
> +M: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
> +S: Supported
> +F: Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
> +F: drivers/clk/starfive/clk-starfive-jh7110-pll.*
> +
> STARFIVE JH7110 SYSCON
> M: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
> M: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
> diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
> index 5d2333106f13..5195f7be5213 100644
> --- a/drivers/clk/starfive/Kconfig
> +++ b/drivers/clk/starfive/Kconfig
> @@ -21,6 +21,14 @@ config CLK_STARFIVE_JH7100_AUDIO
> Say Y or M here to support the audio clocks on the StarFive JH7100
> SoC.
>
> +config CLK_STARFIVE_JH7110_PLL
> + bool "StarFive JH7110 PLL clock support"
> + depends on ARCH_STARFIVE || COMPILE_TEST
> + default ARCH_STARFIVE
> + help
> + Say yes here to support the PLL clock controller on the
> + StarFive JH7110 SoC.
> +
> config CLK_STARFIVE_JH7110_SYS
> bool "StarFive JH7110 system clock support"
> depends on ARCH_STARFIVE || COMPILE_TEST
> diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
> index f3df7d957b1e..b48e539e52b0 100644
> --- a/drivers/clk/starfive/Makefile
> +++ b/drivers/clk/starfive/Makefile
> @@ -4,5 +4,6 @@ obj-$(CONFIG_CLK_STARFIVE_JH71X0) += clk-starfive-jh71x0.o
> obj-$(CONFIG_CLK_STARFIVE_JH7100) += clk-starfive-jh7100.o
> obj-$(CONFIG_CLK_STARFIVE_JH7100_AUDIO) += clk-starfive-jh7100-audio.o
>
> +obj-$(CONFIG_CLK_STARFIVE_JH7110_PLL) += clk-starfive-jh7110-pll.o
> obj-$(CONFIG_CLK_STARFIVE_JH7110_SYS) += clk-starfive-jh7110-sys.o
> obj-$(CONFIG_CLK_STARFIVE_JH7110_AON) += clk-starfive-jh7110-aon.o
> diff --git a/drivers/clk/starfive/clk-starfive-jh7110-pll.c b/drivers/clk/starfive/clk-starfive-jh7110-pll.c
> new file mode 100644
> index 000000000000..b10c142d456d
> --- /dev/null
> +++ b/drivers/clk/starfive/clk-starfive-jh7110-pll.c
> @@ -0,0 +1,507 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * StarFive JH7110 PLL Clock Generator Driver
> + *
> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> + * Copyright (C) 2023 Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
> + *
> + * This driver is about to register JH7110 PLL clock generator and support ops.
> + * The JH7110 have three PLL clock, PLL0, PLL1 and PLL2.
> + * Each PLL clocks work in integer mode or fraction mode by some dividers,
> + * and the configuration registers and dividers are set in several syscon registers.
> + * The formula for calculating frequency is:
> + * Fvco = Fref * (NI + NF) / M / Q1
> + * Fref: OSC source clock rate
> + * NI: integer frequency dividing ratio of feedback divider, set by fbdiv[11:0].
> + * NF: fractional frequency dividing ratio, set by frac[23:0]. NF = frac[23:0] / 2^24 = 0 ~ 0.999.
> + * M: frequency dividing ratio of pre-divider, set by prediv[5:0].
> + * Q1: frequency dividing ratio of post divider, set by 2^postdiv1[1:0], eg. 1, 2, 4 or 8.
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk-provider.h>
> +#include <linux/debugfs.h>
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/clock/starfive,jh7110-crg.h>
> +
> +/* this driver expects a 24MHz input frequency from the oscillator */
> +#define JH7110_PLL_OSC_RATE 24000000UL
> +
> +#define JH7110_PLL0_PD_OFFSET 0x18
> +#define JH7110_PLL0_DACPD_SHIFT 24
> +#define JH7110_PLL0_DACPD_MASK BIT(24)
> +#define JH7110_PLL0_DSMPD_SHIFT 25
> +#define JH7110_PLL0_DSMPD_MASK BIT(25)
> +#define JH7110_PLL0_FBDIV_OFFSET 0x1c
> +#define JH7110_PLL0_FBDIV_SHIFT 0
> +#define JH7110_PLL0_FBDIV_MASK GENMASK(11, 0)
> +#define JH7110_PLL0_FRAC_OFFSET 0x20
> +#define JH7110_PLL0_PREDIV_OFFSET 0x24
> +
> +#define JH7110_PLL1_PD_OFFSET 0x24
> +#define JH7110_PLL1_DACPD_SHIFT 15
> +#define JH7110_PLL1_DACPD_MASK BIT(15)
> +#define JH7110_PLL1_DSMPD_SHIFT 16
> +#define JH7110_PLL1_DSMPD_MASK BIT(16)
> +#define JH7110_PLL1_FBDIV_OFFSET 0x24
> +#define JH7110_PLL1_FBDIV_SHIFT 17
> +#define JH7110_PLL1_FBDIV_MASK GENMASK(28, 17)
> +#define JH7110_PLL1_FRAC_OFFSET 0x28
> +#define JH7110_PLL1_PREDIV_OFFSET 0x2c
> +
> +#define JH7110_PLL2_PD_OFFSET 0x2c
> +#define JH7110_PLL2_DACPD_SHIFT 15
> +#define JH7110_PLL2_DACPD_MASK BIT(15)
> +#define JH7110_PLL2_DSMPD_SHIFT 16
> +#define JH7110_PLL2_DSMPD_MASK BIT(16)
> +#define JH7110_PLL2_FBDIV_OFFSET 0x2c
> +#define JH7110_PLL2_FBDIV_SHIFT 17
> +#define JH7110_PLL2_FBDIV_MASK GENMASK(28, 17)
> +#define JH7110_PLL2_FRAC_OFFSET 0x30
> +#define JH7110_PLL2_PREDIV_OFFSET 0x34
> +
> +#define JH7110_PLL_FRAC_SHIFT 0
> +#define JH7110_PLL_FRAC_MASK GENMASK(23, 0)
> +#define JH7110_PLL_POSTDIV1_SHIFT 28
> +#define JH7110_PLL_POSTDIV1_MASK GENMASK(29, 28)
> +#define JH7110_PLL_PREDIV_SHIFT 0
> +#define JH7110_PLL_PREDIV_MASK GENMASK(5, 0)
> +
> +enum jh7110_pll_mode {
> + JH7110_PLL_MODE_FRACTION,
> + JH7110_PLL_MODE_INTEGER,
> +};
> +
> +struct jh7110_pll_preset {
> + unsigned long freq;
> + u32 frac; /* frac value should be decimals multiplied by 2^24 */
> + unsigned fbdiv : 12; /* fbdiv value should be 8 to 4095 */
> + unsigned prediv : 6;
> + unsigned postdiv1 : 2;
> + unsigned mode : 1;
> +};
> +
> +struct jh7110_pll_info {
> + char *name;
> + const struct jh7110_pll_preset *presets;
> + unsigned int npresets;
> + struct {
> + unsigned int pd;
> + unsigned int fbdiv;
> + unsigned int frac;
> + unsigned int prediv;
> + } offsets;
> + struct {
> + u32 dacpd;
> + u32 dsmpd;
> + u32 fbdiv;
> + } masks;
> + struct {
> + char dacpd;
> + char dsmpd;
> + char fbdiv;
> + } shifts;
> +};
> +
> +#define _JH7110_PLL(_idx, _name, _presets) \
> + [_idx] = { \
> + .name = _name, \
> + .presets = _presets, \
> + .npresets = ARRAY_SIZE(_presets), \
> + .offsets = { \
> + .pd = JH7110_PLL##_idx##_PD_OFFSET, \
> + .fbdiv = JH7110_PLL##_idx##_FBDIV_OFFSET, \
> + .frac = JH7110_PLL##_idx##_FRAC_OFFSET, \
> + .prediv = JH7110_PLL##_idx##_PREDIV_OFFSET, \
> + }, \
> + .masks = { \
> + .dacpd = JH7110_PLL##_idx##_DACPD_MASK, \
> + .dsmpd = JH7110_PLL##_idx##_DSMPD_MASK, \
> + .fbdiv = JH7110_PLL##_idx##_FBDIV_MASK, \
> + }, \
> + .shifts = { \
> + .dacpd = JH7110_PLL##_idx##_DACPD_SHIFT, \
> + .dsmpd = JH7110_PLL##_idx##_DSMPD_SHIFT, \
> + .fbdiv = JH7110_PLL##_idx##_FBDIV_SHIFT, \
> + }, \
> + }
> +#define JH7110_PLL(idx, name, presets) _JH7110_PLL(idx, name, presets)
> +
> +struct jh7110_pll_data {
> + struct clk_hw hw;
> + unsigned int idx;
> +};
> +
> +struct jh7110_pll_priv {
> + struct device *dev;
> + struct regmap *regmap;
> + struct jh7110_pll_data pll[JH7110_PLLCLK_END];
> +};
> +
> +struct jh7110_pll_regvals {
> + u32 dacpd;
> + u32 dsmpd;
> + u32 fbdiv;
> + u32 frac;
> + u32 postdiv1;
> + u32 prediv;
> +};
> +
> +/*
> + * Because the pll frequency is relatively fixed,
> + * it cannot be set arbitrarily, so it needs a specific configuration.
> + * PLL0 frequency should be multiple of 125MHz (USB frequency).
> + */
> +static const struct jh7110_pll_preset jh7110_pll0_presets[] = {
> + {
> + .freq = 375000000,
> + .fbdiv = 125,
> + .prediv = 8,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 500000000,
> + .fbdiv = 125,
> + .prediv = 6,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 625000000,
> + .fbdiv = 625,
> + .prediv = 24,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 750000000,
> + .fbdiv = 125,
> + .prediv = 4,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 875000000,
> + .fbdiv = 875,
> + .prediv = 24,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 1000000000,
> + .fbdiv = 125,
> + .prediv = 3,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 1250000000,
> + .fbdiv = 625,
> + .prediv = 12,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 1375000000,
> + .fbdiv = 1375,
> + .prediv = 24,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 1500000000,
> + .fbdiv = 125,
> + .prediv = 2,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + },
> +};
> +
> +static const struct jh7110_pll_preset jh7110_pll1_presets[] = {
> + {
> + .freq = 1066000000,
> + .fbdiv = 533,
> + .prediv = 12,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 1200000000,
> + .fbdiv = 50,
> + .prediv = 1,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 1400000000,
> + .fbdiv = 350,
> + .prediv = 6,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 1600000000,
> + .fbdiv = 200,
> + .prediv = 3,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + },
> +};
> +
> +static const struct jh7110_pll_preset jh7110_pll2_presets[] = {
> + {
> + .freq = 1188000000,
> + .fbdiv = 99,
> + .prediv = 2,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + }, {
> + .freq = 1228800000,
> + .fbdiv = 256,
> + .prediv = 5,
> + .postdiv1 = 0,
> + .mode = JH7110_PLL_MODE_INTEGER,
> + },
> +};
> +
> +static const struct jh7110_pll_info jh7110_plls[JH7110_PLLCLK_END] = {
> + JH7110_PLL(JH7110_CLK_PLL0_OUT, "pll0_out", jh7110_pll0_presets),
> + JH7110_PLL(JH7110_CLK_PLL1_OUT, "pll1_out", jh7110_pll1_presets),
> + JH7110_PLL(JH7110_CLK_PLL2_OUT, "pll2_out", jh7110_pll2_presets),
> +};
> +
> +static struct jh7110_pll_data *jh7110_pll_data_from(struct clk_hw *hw)
> +{
> + return container_of(hw, struct jh7110_pll_data, hw);
> +}
> +
> +static struct jh7110_pll_priv *jh7110_pll_priv_from(struct jh7110_pll_data *pll)
> +{
> + return container_of(pll, struct jh7110_pll_priv, pll[pll->idx]);
> +}
> +
> +static void jh7110_pll_regvals_get(struct regmap *regmap,
> + const struct jh7110_pll_info *info,
> + struct jh7110_pll_regvals *ret)
> +{
> + u32 val;
> +
> + regmap_read(regmap, info->offsets.pd, &val);
> + ret->dacpd = (val & info->masks.dacpd) >> info->shifts.dacpd;
> + ret->dsmpd = (val & info->masks.dsmpd) >> info->shifts.dsmpd;
> +
> + regmap_read(regmap, info->offsets.fbdiv, &val);
> + ret->fbdiv = (val & info->masks.fbdiv) >> info->shifts.fbdiv;
> +
> + regmap_read(regmap, info->offsets.frac, &val);
> + ret->frac = (val & JH7110_PLL_FRAC_MASK) >> JH7110_PLL_FRAC_SHIFT;
> + ret->postdiv1 = (val & JH7110_PLL_POSTDIV1_MASK) >> JH7110_PLL_POSTDIV1_SHIFT;
> +
> + regmap_read(regmap, info->offsets.prediv, &val);
> + ret->prediv = (val & JH7110_PLL_PREDIV_MASK) >> JH7110_PLL_PREDIV_SHIFT;
> +}
> +
> +static unsigned long jh7110_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + struct jh7110_pll_data *pll = jh7110_pll_data_from(hw);
> + struct jh7110_pll_priv *priv = jh7110_pll_priv_from(pll);
> + struct jh7110_pll_regvals val;
> + unsigned long rate;
> +
> + jh7110_pll_regvals_get(priv->regmap, &jh7110_plls[pll->idx], &val);
> +
> + /*
> + * dacpd = dsmpd = 0: fraction mode
> + * dacpd = dsmpd = 1: integer mode, frac value ignored
> + *
> + * rate = parent * (fbdiv + frac/2^24) / prediv / 2^postdiv1
> + * = (parent * fbdiv + parent * frac / 2^24) / (prediv * 2^postdiv1)
> + */
> + if (val.dacpd == 0 && val.dsmpd == 0)
> + rate = parent_rate * val.frac / (1UL << 24);
> + else if (val.dacpd == 1 && val.dsmpd == 1)
> + rate = 0;
> + else
> + return 0;
> +
> + rate += parent_rate * val.fbdiv;
> + rate /= val.prediv << val.postdiv1;
> +
> + return rate;
> +}
> +
> +static int jh7110_pll_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
> +{
> + struct jh7110_pll_data *pll = jh7110_pll_data_from(hw);
> + const struct jh7110_pll_info *info = &jh7110_plls[pll->idx];
> + const struct jh7110_pll_preset *selected = &info->presets[0];
> + unsigned int idx;
> +
> + /* if the parent rate doesn't match our expectations the presets won't work */
> + if (req->best_parent_rate != JH7110_PLL_OSC_RATE) {
> + req->rate = jh7110_pll_recalc_rate(hw, req->best_parent_rate);
> + return 0;
> + }
> +
> + /* find highest rate lower or equal to the requested rate */
> + for (idx = 1; idx < info->npresets; idx++) {
> + const struct jh7110_pll_preset *val = &info->presets[idx];
> +
> + if (req->rate < val->freq)
> + break;
> +
> + selected = val;
> + }
> +
> + req->rate = selected->freq;
> + return 0;
> +}
> +
> +static int jh7110_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct jh7110_pll_data *pll = jh7110_pll_data_from(hw);
> + struct jh7110_pll_priv *priv = jh7110_pll_priv_from(pll);
> + const struct jh7110_pll_info *info = &jh7110_plls[pll->idx];
> + const struct jh7110_pll_preset *val;
> + unsigned int idx;
> +
> + /* if the parent rate doesn't match our expectations the presets won't work */
> + if (parent_rate != JH7110_PLL_OSC_RATE)
> + return -EINVAL;
> +
> + for (idx = 0, val = &info->presets[0]; idx < info->npresets; idx++, val++) {
> + if (val->freq == rate)
> + goto found;
> + }
> + return -EINVAL;
> +
> +found:
> + if (val->mode == JH7110_PLL_MODE_FRACTION)
> + regmap_update_bits(priv->regmap, info->offsets.frac, JH7110_PLL_FRAC_MASK,
> + val->frac << JH7110_PLL_FRAC_SHIFT);
> +
> + regmap_update_bits(priv->regmap, info->offsets.pd, info->masks.dacpd,
> + (u32)val->mode << info->shifts.dacpd);
> + regmap_update_bits(priv->regmap, info->offsets.pd, info->masks.dsmpd,
> + (u32)val->mode << info->shifts.dsmpd);
> + regmap_update_bits(priv->regmap, info->offsets.prediv, JH7110_PLL_PREDIV_MASK,
> + (u32)val->prediv << JH7110_PLL_PREDIV_SHIFT);
> + regmap_update_bits(priv->regmap, info->offsets.fbdiv, info->masks.fbdiv,
> + val->fbdiv << info->shifts.fbdiv);
> + regmap_update_bits(priv->regmap, info->offsets.frac, JH7110_PLL_POSTDIV1_MASK,
> + (u32)val->postdiv1 << JH7110_PLL_POSTDIV1_SHIFT);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_DEBUG_FS
> +static int jh7110_pll_registers_read(struct seq_file *s, void *unused)
> +{
> + struct jh7110_pll_data *pll = s->private;
> + struct jh7110_pll_priv *priv = jh7110_pll_priv_from(pll);
> + struct jh7110_pll_regvals val;
> +
> + jh7110_pll_regvals_get(priv->regmap, &jh7110_plls[pll->idx], &val);
> +
> + seq_printf(s, "fbdiv=%u\n"
> + "frac=%u\n"
> + "prediv=%u\n"
> + "postdiv1=%u\n"
> + "dacpd=%u\n"
> + "dsmpd=%u\n",
> + val.fbdiv, val.frac, val.prediv, val.postdiv1,
> + val.dacpd, val.dsmpd);
> +
> + return 0;
> +}
> +
> +static int jh7110_pll_registers_open(struct inode *inode, struct file *f)
> +{
> + return single_open(f, jh7110_pll_registers_read, inode->i_private);
> +}
> +
> +static const struct file_operations jh7110_pll_registers_ops = {
> + .owner = THIS_MODULE,
> + .open = jh7110_pll_registers_open,
> + .release = single_release,
> + .read = seq_read,
> + .llseek = seq_lseek
> +};
> +
> +static void jh7110_pll_debug_init(struct clk_hw *hw, struct dentry *dentry)
> +{
> + struct jh7110_pll_data *pll = jh7110_pll_data_from(hw);
> +
> + debugfs_create_file("registers", 0400, dentry, pll,
> + &jh7110_pll_registers_ops);
> +}
> +#else
> +#define jh7110_pll_debug_init NULL
> +#endif
> +
> +static const struct clk_ops jh7110_pll_ops = {
> + .recalc_rate = jh7110_pll_recalc_rate,
> + .determine_rate = jh7110_pll_determine_rate,
> + .set_rate = jh7110_pll_set_rate,
> + .debug_init = jh7110_pll_debug_init,
> +};
> +
> +static struct clk_hw *jh7110_pll_get(struct of_phandle_args *clkspec, void *data)
> +{
> + struct jh7110_pll_priv *priv = data;
> + unsigned int idx = clkspec->args[0];
> +
> + if (idx < JH7110_PLLCLK_END)
> + return &priv->pll[idx].hw;
> +
> + return ERR_PTR(-EINVAL);
> +}
> +
> +static int jh7110_pll_probe(struct platform_device *pdev)
> +{
> + struct jh7110_pll_priv *priv;
> + unsigned int idx;
> + int ret;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = &pdev->dev;
> + priv->regmap = syscon_node_to_regmap(priv->dev->of_node->parent);
> + if (IS_ERR(priv->regmap))
> + return PTR_ERR(priv->regmap);
> +
> + for (idx = 0; idx < JH7110_PLLCLK_END; idx++) {
> + struct clk_parent_data parents = {
> + .index = 0,
> + };
> + struct clk_init_data init = {
> + .name = jh7110_plls[idx].name,
> + .ops = &jh7110_pll_ops,
> + .parent_data = &parents,
> + .num_parents = 1,
> + .flags = 0,
> + };
> + struct jh7110_pll_data *pll = &priv->pll[idx];
> +
> + pll->hw.init = &init;
> + pll->idx = idx;
> +
> + ret = devm_clk_hw_register(&pdev->dev, &pll->hw);
> + if (ret)
> + return ret;
> + }
> +
> + return devm_of_clk_add_hw_provider(&pdev->dev, jh7110_pll_get, priv);
> +}
> +
> +static const struct of_device_id jh7110_pll_match[] = {
> + { .compatible = "starfive,jh7110-pll" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, jh7110_pll_match);
> +
> +static struct platform_driver jh7110_pll_driver = {
> + .driver = {
> + .name = "clk-starfive-jh7110-pll",
> + .of_match_table = jh7110_pll_match,
> + },
> +};
> +builtin_platform_driver_probe(jh7110_pll_driver, jh7110_pll_probe);
> --
> 2.25.1
>
