On 12/07/2023 14:12, Pankaj Gupta wrote: > The NXP's i.MX EdgeLock Enclave, a HW IP creating an embedded > secure enclave within the SoC boundary to enable features like > - HSM > - SHE > - V2X > > Communicates via message unit with linux kernel. This driver > is enables communication ensuring well defined message sequence > protocol between Application Core and enclave's firmware. > > Driver configures multiple misc-device on the MU, for multiple > user-space applications can communicate on single MU. > > It exists on some i.MX processors. e.g. i.MX8ULP, i.MX93 etc. > > Signed-off-by: Pankaj Gupta <pankaj.gupta@xxxxxxx> > --- > .../bindings/arm/freescale/fsl,se-fw.yaml | 121 ++++++++++++++++++ > 1 file changed, 121 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,se-fw.yaml > > diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,se-fw.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,se-fw.yaml > new file mode 100644 > index 000000000000..7567da0b4c21 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,se-fw.yaml > @@ -0,0 +1,121 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/freescale/fsl,se-fw.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP i.MX EdgeLock Enclave Firmware (ELEFW) > + > +maintainers: > + - Pankaj Gupta <pankaj.gupta@xxxxxxx> > + > +description: | > + > + The NXP's i.MX EdgeLock Enclave, a HW IP creating an embedded > + secure enclave within the SoC boundary to enable features like > + - HSM > + - SHE > + - V2X > + > + It uses message unit to communicate and coordinate to pass messages > + (e.g., data, status and control) through its interfaces. > + > + This driver configures multiple misc-devices on the MU, to exchange > + messages from User-space application and NXP's Edgelocke Enclave firmware. > + The driver ensures that the messages must follow the following protocol > + defined. > + > + Non-Secure + Secure > + | > + | > + +---------+ +-------------+ | > + | ele_mu.c+<---->+imx-mailbox.c| | > + | | | mailbox.c +<-->+------+ +------+ > + +---+-----+ +-------------+ | MU X +<-->+ ELE | > + | +------+ +------+ > + +----------------+ | > + | | | > + v v | > + logical logical | > + receiver waiter | > + + + | > + | | | > + | | | > + | +----+------+ | > + | | | | > + | | | | > + device_ctx device_ctx device_ctx | > + | > + User 0 User 1 User Y | > + +------+ +------+ +------+ | > + |misc.c| |misc.c| |misc.c| | > + kernel space +------+ +------+ +------+ | > + | > + +------------------------------------------------------ | > + | | | | > + userspace /dev/ele_muXch0 | | | > + /dev/ele_muXch1 | | > + /dev/ele_muXchY | > + | > + > + When a user sends a command to the ELE, it registers its device_ctx as > + waiter of a response from ELE. > + > + A user can be registered as receiver of command from the ELE. > + Create char devices in /dev as channels of the form /dev/ele_muXchY with X > + the id of the driver and Y for each users. It allows to send and receive > + messages to the NXP EdgeLock Enclave IP on NXP SoC, where current possible > + value, i.e., supported SoC(s) are imx8ulp, imx93. > + > +properties: > + compatible: > + enum: > + - fsl,imx-ele > + - fsl,imx93-ele > + > + mboxes: > + description: > + A list of phandles of TX MU channels followed by a list of phandles of > + RX MU channels. The number of expected tx and rx channels is 1 TX, and > + 1 RX channels. All MU channels must be within the same MU instance. > + Cross instances are not allowed. The MU instance to be used is S4MUAP > + for imx8ulp & imx93. Users need to ensure that used MU instance does not > + conflict with other execution environments. > + items: > + - description: TX0 MU channel > + - description: RX0 MU channel > + > + mbox-names: > + items: > + - const: tx > + - const: rx > + > + fsl,mu-did: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Owner of message-unit, is identified via Domain ID or did. What is Domain ID? > + > + fsl,mu-id: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Identifier to the message-unit among the multiple message-unit that exists on SoC. > + It is used to create the channels, default to 2 Do you expect then multiple ele nodes in the DTS? What are these two properties and why they are fixed per SoC, but still embedded in DTS? > + > + Drop stray blank line. > +required: > + - compatible > + - mboxes > + - mbox-names > + > +additionalProperties: false > + > +examples: > + - | > + ele_mu: ele_mu { No underscores in node names, generic node names, e.g. firmware. Look at existing code. > + compatible = "fsl,imx93-ele"; > + mbox-names = "tx", "rx"; > + mboxes = <&s4muap 2 0 > + &s4muap 3 0>; Two items, not one. > + fsl,mu-did = <1>; > + fsl,mu-id = <1>; > + }; Plus you clearly did not test the binding and DTS. You said you did some internal review, so I assume this also includes some testing. How did you test your DTS? Best regards, Krzysztof