Re: [PATCH 07/19] clk: samsung: exynos5433: Add clocks for CMU_DISP domain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Chanwoo,

On Tuesday 02 December 2014 02:19 PM, Chanwoo Choi wrote:
This patch adds the the mux/divider/gate clocks for CMU_DISP domain which
includes the clocks of Display IPs (DECON/HDMI/DSIM/MIXER). The CMU_DISP clocks
is used to need the source clock of CMU_MIF domain so, the CMU_MIF's clocks
related to CMU_DISP should be always on state.

Also, CMU_DISP must need the source clock of 'sclk_hdmi_spdif_disp'
from CMU_TOP domain. This patch adds the clocks of CMU_TOP related to HDMI.

Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
Acked-by: Geunsik Lim <geunsik.lim@xxxxxxxxxxx>
---
  .../devicetree/bindings/clock/exynos5433-clock.txt |   9 +
  drivers/clk/samsung/clk-exynos5433.c               | 465 ++++++++++++++++++++-
  include/dt-bindings/clock/exynos5433.h             | 114 ++++-
  3 files changed, 577 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 27dd77b..8d3dad4 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -21,6 +21,8 @@ Required Properties:
      which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
    - "samsung,exynos5433-cmu-g2d"   - clock controller compatible for CMU_G2D
      which generates clocks for G2D/MDMA IPs.
+  - "samsung,exynos5433-cmu-disp"  - clock controller compatible for CMU_DISP
+    which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.

  - reg: physical base address of the controller and length of memory mapped
    region.
@@ -78,6 +80,13 @@ Example 1: Examples of clock controller nodes are listed below.
  		#clock-cells = <1>;
  	};

+	cmu_disp: clock-controller@0x13b90000 {
+		compatible = "samsung,exynos5433-cmu-disp";
+		reg = <0x13b90000 0x0c04>;
+		#clock-cells = <1>;
+	};
+
+
  Example 2: UART controller node that consumes the clock generated by the clock
  	   controller.

diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 10197a1..ec23e97 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -245,6 +245,8 @@ PNAME(mout_sclk_audio1_p)	= { "ioclk_audiocdclk1", "fin_pll",
  PNAME(mout_sclk_audio0_p)	= { "ioclk_audiocdclk0", "fin_pll",
  				    "mout_aud_pll_user_t",};

+PNAME(mout_sclk_hdmi_spdif_p)	= { "sclk_audio1", "ioclk_spdif_extclk", };
+
  static struct samsung_fixed_factor_clock top_fixed_factor_clks[] __initdata = {
  	FFACTOR(0, "sclk_bus_pll", "fout_bus_pll", 1, 1, 0),
  	FFACTOR(0, "sclk_mfc_pll", "fout_mfc_pll", 1, 1, 0),
@@ -397,6 +399,10 @@ static struct samsung_mux_clock top_mux_clks[] __initdata = {
  			MUX_SEL_TOP_PERIC1, 4, 2),
  	MUX(CLK_MOUT_SCLK_AUDIO0, "mout_sclk_audio0", mout_sclk_audio0_p,
  			MUX_SEL_TOP_PERIC1, 0, 2),
+
+	/* MUX_SEL_TOP_DISP */
+	MUX(CLK_MOUT_SCLK_HDMI_SPDIF, "mout_sclk_hdmi_spdif",
+			mout_sclk_hdmi_spdif_p, MUX_SEL_TOP_DISP, 0, 1),
  };

  static struct samsung_div_clock top_div_clks[] __initdata = {
@@ -1256,9 +1262,9 @@ static struct samsung_gate_clock mif_gate_clks[] __initdata = {

  	/* ENABLE_ACLK_MIF3 */
  	GATE(CLK_ACLK_BUS2_400, "aclk_bus2_400", "div_aclk_bus2_400",
-			ENABLE_ACLK_MIF3, 4, 0, 0),
+			ENABLE_ACLK_MIF3, 4, CLK_IGNORE_UNUSED, 0),
  	GATE(CLK_ACLK_DISP_333, "aclk_disp_333", "div_aclk_disp_333",
-			ENABLE_ACLK_MIF3, 1, 0, 0),
+			ENABLE_ACLK_MIF3, 1, CLK_IGNORE_UNUSED, 0),
  	GATE(CLK_ACLK_CPIF_200, "aclk_cpif_200", "div_aclk_cpif_200",
  			ENABLE_ACLK_MIF3, 0, CLK_IGNORE_UNUSED, 0),

@@ -1333,21 +1339,30 @@ static struct samsung_gate_clock mif_gate_clks[] __initdata = {

  	/* ENABLE_SCLK_MIF */
  	GATE(CLK_SCLK_DSIM1_DISP, "sclk_dsim1_disp", "div_sclk_dsim1",
-			ENABLE_SCLK_MIF, 15, 0, 0),
+			ENABLE_SCLK_MIF, 15, CLK_IGNORE_UNUSED, 0),
  	GATE(CLK_SCLK_DECON_TV_VCLK_DISP, "sclk_decon_tv_vclk_disp",
-			"div_sclk_decon_tv_vclk", ENABLE_SCLK_MIF, 14, 0, 0),
+			"div_sclk_decon_tv_vclk", ENABLE_SCLK_MIF,
+			14, CLK_IGNORE_UNUSED, 0),
  	GATE(CLK_SCLK_DSIM0_DISP, "sclk_dsim0_disp", "div_sclk_dsim0",
-			ENABLE_SCLK_MIF, 9, 0, 0),
+			ENABLE_SCLK_MIF, 9, CLK_IGNORE_UNUSED, 0),
  	GATE(CLK_SCLK_DSD_DISP, "sclk_dsd_disp", "div_sclk_dsd",
-			ENABLE_SCLK_MIF, 8, 0, 0),
+			ENABLE_SCLK_MIF, 8, CLK_IGNORE_UNUSED, 0),
  	GATE(CLK_SCLK_DECON_TV_ECLK_DISP, "sclk_decon_tv_eclk_disp",
-			"div_sclk_decon_tv_eclk", ENABLE_SCLK_MIF, 7, 0, 0),
+			"div_sclk_decon_tv_eclk", ENABLE_SCLK_MIF,
+			7, CLK_IGNORE_UNUSED, 0),
  	GATE(CLK_SCLK_DECON_VCLK_DISP, "sclk_decon_vclk_disp",
-			"div_sclk_decon_vclk", ENABLE_SCLK_MIF, 6, 0, 0),
+			"div_sclk_decon_vclk", ENABLE_SCLK_MIF,
+			6, CLK_IGNORE_UNUSED, 0),
  	GATE(CLK_SCLK_DECON_ECLK_DISP, "sclk_decon_eclk_disp",
-			"div_sclk_decon_eclk", ENABLE_SCLK_MIF, 5, 0, 0),
+			"div_sclk_decon_eclk", ENABLE_SCLK_MIF,
+			5, CLK_IGNORE_UNUSED, 0),
  	GATE(CLK_SCLK_HPM_MIF, "sclk_hpm_mif", "div_sclk_hpm_mif",
-			ENABLE_SCLK_MIF, 4, 0, 0),
+			ENABLE_SCLK_MIF, 4, CLK_IGNORE_UNUSED, 0),
+
+	/* ENABLE_SCLK_TOP_DISP */
+	GATE(CLK_SCLK_HDMI_SPDIF_DISP, "sclk_hdmi_spdif_disp",
+			"mout_sclk_hdmi_spdif", ENABLE_SCLK_TOP_DISP, 0,
+			CLK_IGNORE_UNUSED, 0),
  };

  static struct samsung_cmu_info mif_cmu_info __initdata = {
@@ -2009,3 +2024,433 @@ static void __init exynos5433_cmu_g2d_init(struct device_node *np)

  CLK_OF_DECLARE(exynos5433_cmu_g2d, "samsung,exynos5433-cmu-g2d",
  		exynos5433_cmu_g2d_init);
+
+/*
+ * Register offset definitions for CMU_DISP
+ */
+#define DISP_PLL_LOCK			0x0000
+#define DISP_PLL_CON0			0x0100
+#define DISP_PLL_CON1			0x0104
+#define DISP_PLL_FREQ_DET		0x0108
+#define MUX_SEL_DISP0			0x0200
+#define MUX_SEL_DISP1			0x0204
+#define MUX_SEL_DISP2			0x0208
+#define MUX_SEL_DISP3			0x020c
+#define MUX_SEL_DISP4			0x0210
+#define MUX_ENABLE_DISP0		0x0300
+#define MUX_ENABLE_DISP1		0x0304
+#define MUX_ENABLE_DISP2		0x0308
+#define MUX_ENABLE_DISP3		0x030c
+#define MUX_ENABLE_DISP4		0x0310
+#define MUX_STAT_DISP0			0x0400
+#define MUX_STAT_DISP1			0x0404
+#define MUX_STAT_DISP2			0x0408
+#define MUX_STAT_DISP3			0x040c
+#define MUX_STAT_DISP4			0x0410
+#define MUX_IGNORE_DISP2		0x0508
+#define DIV_DISP			0x0600
+#define DIV_DISP_PLL_FREQ_DET		0x0604
+#define DIV_STAT_DISP			0x0700
+#define DIV_STAT_DISP_PLL_FREQ_DET	0x0704
+#define ENABLE_ACLK_DISP0		0x0800
+#define ENABLE_ACLK_DISP1		0x0804
+#define ENABLE_PCLK_DISP		0x0900
+#define ENABLE_SCLK_DISP		0x0a00
+#define ENABLE_IP_DISP0			0x0b00
+#define ENABLE_IP_DISP1			0x0b04
+#define CLKOUT_CMU_DISP			0x0c00
+#define CLKOUT_CMU_DISP_DIV_STAT	0x0c04
+
+static unsigned long disp_clk_regs[] __initdata = {
+	DISP_PLL_LOCK,
+	DISP_PLL_CON0,
+	DISP_PLL_CON1,
+	DISP_PLL_FREQ_DET,
+	MUX_SEL_DISP0,
+	MUX_SEL_DISP1,
+	MUX_SEL_DISP2,
+	MUX_SEL_DISP3,
+	MUX_SEL_DISP4,
+	MUX_ENABLE_DISP0,
+	MUX_ENABLE_DISP1,
+	MUX_ENABLE_DISP2,
+	MUX_ENABLE_DISP3,
+	MUX_ENABLE_DISP4,
+	MUX_STAT_DISP0,
+	MUX_STAT_DISP1,
+	MUX_STAT_DISP2,
+	MUX_STAT_DISP3,
+	MUX_STAT_DISP4,
+	MUX_IGNORE_DISP2,
+	DIV_DISP,
+	DIV_DISP_PLL_FREQ_DET,
+	DIV_STAT_DISP,
+	DIV_STAT_DISP_PLL_FREQ_DET,
+	ENABLE_ACLK_DISP0,
+	ENABLE_ACLK_DISP1,
+	ENABLE_PCLK_DISP,
+	ENABLE_SCLK_DISP,
+	ENABLE_IP_DISP0,
+	ENABLE_IP_DISP1,
+	CLKOUT_CMU_DISP,
+	CLKOUT_CMU_DISP_DIV_STAT,
+};
+
+/* list of all parent clock list */
+PNAME(mout_disp_pll_p)			= { "fin_pll", "fout_disp_pll", };
+PNAME(mout_sclk_dsim1_user_p)		= { "fin_pll", "sclk_dsim1_disp", };
+PNAME(mout_sclk_dsim0_user_p)		= { "fin_pll", "sclk_dsim0_disp", };
+PNAME(mout_sclk_dsd_user_p)		= { "fin_pll", "sclk_dsd_disp", };
+PNAME(mout_sclk_decon_tv_eclk_user_p)	= { "fin_pll",
+					    "sclk_decon_tv_eclk_disp", };
+PNAME(mout_sclk_decon_vclk_user_p)	= { "fin_pll",
+					    "sclk_decon_vclk_disp", };
+PNAME(mout_sclk_decon_eclk_user_p)	= { "fin_pll",
+					    "sclk_decon_eclk_disp", };
+PNAME(mout_sclk_decon_tv_vlkc_user_p)	= { "fin_pll",
+					    "sclk_decon_tv_vclk_disp", };
+PNAME(mout_aclk_disp_333_user_p)	= { "fin_pll", "aclk_disp_333", };
+
+PNAME(mout_phyclk_mipidphy1_bitclkdiv8_user_p)	= { "fin_pll",
+					"phyclk_mipidphy1_bitclkdiv8_phy", };
+PNAME(mout_phyclk_mipidphy1_rxclkesc0_user_p)	= { "fin_pll",
+					"phyclk_mipidphy1_rxclkesc0_phy", };
+PNAME(mout_phyclk_mipidphy0_bitclkdiv8_user_p)	= { "fin_pll",
+					"phyclk_mipidphy0_bitclkdiv8_phy", };
+PNAME(mout_phyclk_mipidphy0_rxclkesc0_user_p)	= { "fin_pll",
+					"phyclk_mipidphy0_rxclkesc0_phy", };
+PNAME(mout_phyclk_hdmiphy_tmds_clko_user_p)	= { "fin_pll",
+					"phyclk_hdmiphy_tmds_clko_phy", };
+PNAME(mout_phyclk_hdmiphy_pixel_clko_user_p)	= { "fin_pll",
+					"phyclk_hdmiphy_pixel_clko_phy", };
+
+PNAME(mout_sclk_dsim0_p)		= { "mout_disp_pll",
+					    "mout_sclk_dsim0_user", };
+PNAME(mout_sclk_decon_tv_eclk_p)	= { "mout_disp_pll",
+					    "mout_sclk_decon_tv_eclk_user", };
+PNAME(mout_sclk_decon_vclk_p)		= { "mout_disp_pll",
+					    "mout_sclk_decon_vclk_user", };
+PNAME(mout_sclk_decon_eclk_p)		= { "mout_disp_pll",
+					    "mout_sclk_decon_eclk_user", };
+
+PNAME(mout_sclk_dsim1_b_disp_p)		= { "mout_sclk_dsim1_a_disp",
+					    "mout_sclk_dsim1_user", };
+PNAME(mout_sclk_dsim1_a_disp_p)		= { "mout_disp_pll",
+					    "mout_sclk_dsim0_user", };

mout_sclk_dsim1_a_disp_p and mout_sclk_dsim0_p has same parent list, so one can be dropped.

+PNAME(mout_sclk_decon_tv_vclk_c_disp_p)	= {
+				"mout_phyclk_hdmiphy_pixel_clko_user",
+				"mout_sclk_decon_tv_vclk_b_disp", };
+PNAME(mout_sclk_decon_tv_vclk_b_disp_p)	= { "mout_sclk_decon_tv_vclk_a_disp",
+					    "mout_sclk_decon_tv_vclk_user", };
+PNAME(mout_sclk_decon_tv_vclk_a_disp_p)	= { "mout_disp_pll",
+					    "mout_sclk_decon_vclk_user", };
+

mout_sclk_decon_tv_vclk_a_disp_p and mout_sclk_decon_vclk_p has same parent list, so one of them can be dropped.

+static struct samsung_pll_clock disp_pll_clks[] __initdata = {
+	PLL(pll_35xx, CLK_FOUT_DISP_PLL, "fout_disp_pll", "fin_pll",
+		DISP_PLL_LOCK, DISP_PLL_CON0, exynos5443_pll_rates),
+};
+
+static struct samsung_fixed_factor_clock disp_fixed_factor_clks[] __initdata = {
+	/*
+	 * sclk_rgb_{vclk|tv_vclk} is half clock of sclk_decon_{vclk|tv_vclk}.
+	 * The divider has fixed value (2) betwwen sclk_rgb_{vclk|tv_vclk}

typo: %s/betwwen/between

+	 * and sclk_decon_{vclk|tv_vclk}.
+	 */
+	FFACTOR(CLK_SCLK_RGB_VCLK, "sclk_rgb_vclk", "sclk_decon_vclk",
+			1, 2, 0),
+	FFACTOR(CLK_SCLK_RGB_TV_VCLK, "sclk_rgb_tv_vclk", "sclk_decon_tv_vclk",
+			1, 2, 0),
+};
+

Thanks,
Pankaj Dubey
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux