Hi Chanwoo,
On Tuesday 02 December 2014 02:19 PM, Chanwoo Choi wrote:
This patch adds the mux/divider/gate clocks for CMU_AUD domain which
includes the clocks of Cortex-A6/Bus/Audio clocks.
Cortex-A6? I think it should be Cortex-A5?
Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
Acked-by: Geunsik Lim <geunsik.lim@xxxxxxxxxxx>
---
.../devicetree/bindings/clock/exynos5433-clock.txt | 7 +
drivers/clk/samsung/clk-exynos5433.c | 173 +++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 53 +++++++
3 files changed, 233 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 8d3dad4..9a6ae75 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -23,6 +23,8 @@ Required Properties:
which generates clocks for G2D/MDMA IPs.
- "samsung,exynos5433-cmu-disp" - clock controller compatible for CMU_DISP
which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
+ - "samsung,exynos5433-cmu-aud" - clock controller compatible for CMU_AUD
+ which generates clocks for Cortex-A5/BUS/AUDIO clocks.
Commit message says Cortex-A6?
- reg: physical base address of the controller and length of memory mapped
region.
@@ -86,6 +88,11 @@ Example 1: Examples of clock controller nodes are listed below.
#clock-cells = <1>;
};
+ cmu_aud: clock-controller@0x114c0000 {
+ compatible = "samsung,exynos5433-cmu-aud";
+ reg = <0x114c0000 0x0b04>;
+ #clock-cells = <1>;
+ };
Example 2: UART controller node that consumes the clock generated by the clock
controller.
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index ec23e97..99262e0 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -2454,3 +2454,176 @@ static void __init exynos5433_cmu_disp_init(struct device_node *np)
CLK_OF_DECLARE(exynos5433_cmu_disp, "samsung,exynos5433-cmu-disp",
exynos5433_cmu_disp_init);
+
+/*
+ * Register offset definitions for CMU_AUD
+ */
+#define MUX_SEL_AUD0 0x0200
+#define MUX_SEL_AUD1 0x0204
+#define MUX_ENABLE_AUD0 0x0300
+#define MUX_ENABLE_AUD1 0x0304
+#define MUX_STAT_AUD0 0x0400
+#define DIV_AUD0 0x0600
+#define DIV_AUD1 0x0604
+#define DIV_STAT_AUD0 0x0700
+#define DIV_STAT_AUD1 0x0704
+#define ENABLE_ACLK_AUD 0x0800
+#define ENABLE_PCLK_AUD 0x0900
+#define ENABLE_SCLK_AUD0 0x0a00
+#define ENABLE_SCLK_AUD1 0x0a04
+#define ENABLE_IP_AUD0 0x0b00
+#define ENABLE_IP_AUD1 0x0b04
+
+static unsigned long aud_clk_regs[] __initdata = {
+ MUX_SEL_AUD0,
+ MUX_SEL_AUD1,
+ MUX_ENABLE_AUD0,
+ MUX_ENABLE_AUD1,
+ MUX_STAT_AUD0,
+ DIV_AUD0,
+ DIV_AUD1,
+ DIV_STAT_AUD0,
+ DIV_STAT_AUD1,
+ ENABLE_ACLK_AUD,
+ ENABLE_PCLK_AUD,
+ ENABLE_SCLK_AUD0,
+ ENABLE_SCLK_AUD1,
+ ENABLE_IP_AUD0,
+ ENABLE_IP_AUD1,
+};
+
+/* list of all parent clock list */
+PNAME(mout_aud_pll_user_aud_p) = { "fin_pll", "fout_aud_pll", };
+PNAME(mout_sclk_aud_pcm_p) = { "mout_aud_pll_user", "ioclk_audiocdclk0",};
+PNAME(mout_sclk_aud_i2s_p) = { "mout_aud_pll_user", "ioclk_audiocdclk0",};
Above two lines can be clubbed with some common name as both has same
parent clocks.
+
+static struct samsung_fixed_rate_clock aud_fixed_clks[] __initdata = {
+ FRATE(0, "ioclk_jtag_tclk", NULL, CLK_IS_ROOT, 188000000),
+ FRATE(0, "ioclk_slimbus_clk", NULL, CLK_IS_ROOT, 188000000),
+ FRATE(0, "ioclk_i2s_bclk", NULL, CLK_IS_ROOT, 188000000),
Are you sure about these clock rates?
As per UM I have, these are having rates as 33 MHz, 25 MHz and 50 MHz
respectively.
+};
+
+static struct samsung_mux_clock aud_mux_clks[] __initdata = {
+ /* MUX_SEL_AUD0 */
+ MUX(CLK_MOUT_AUD_PLL_USER, "mout_aud_pll_user",
+ mout_aud_pll_user_aud_p, MUX_SEL_AUD0, 0, 1),
+
+ /* MUX_SEL_AUD1 */
+ MUX(CLK_MOUT_SCLK_AUD_PCM, "mout_sclk_aud_pcm", mout_sclk_aud_pcm_p,
+ MUX_SEL_AUD1, 8, 1),
+ MUX(CLK_MOUT_SCLK_AUD_I2S, "mout_sclk_aud_i2s", mout_sclk_aud_i2s_p,
+ MUX_SEL_AUD1, 0, 1),
+};
+
Thanks,
Pankaj Dubey
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
