From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
In order to add support for MP2973 and MP2971 replace hardcoded
phase count for both channels by a variable.
Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
---
drivers/hwmon/pmbus/mp2975.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c
index ebc9a84b8ad3..13d8b95eb992 100644
--- a/drivers/hwmon/pmbus/mp2975.c
+++ b/drivers/hwmon/pmbus/mp2975.c
@@ -61,10 +61,15 @@ enum chips {
mp2975
};
+static const int mp2975_max_phases[][MP2975_PAGE_NUM] = {
+ [mp2975] = { MP2975_MAX_PHASE_RAIL1, MP2975_MAX_PHASE_RAIL2 },
+};
+
struct mp2975_data {
struct pmbus_driver_info info;
enum chips chip_id;
int vout_scale;
+ int max_phases[MP2975_PAGE_NUM];
int vid_step[MP2975_PAGE_NUM];
int vref[MP2975_PAGE_NUM];
int vref_off[MP2975_PAGE_NUM];
@@ -304,25 +309,25 @@ static int mp2975_read_word_data(struct i2c_client *client, int page,
return ret;
}
-static int mp2975_identify_multiphase_rail2(struct i2c_client *client)
+static int mp2975_identify_multiphase_rail2(struct i2c_client *client,
+ struct mp2975_data *data)
{
int ret;
/*
- * Identify multiphase for rail 2 - could be from 0 to 4.
+ * Identify multiphase for rail 2 - could be from 0 to data->max_phases[1].
* In case phase number is zero – only page zero is supported
*/
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
if (ret < 0)
return ret;
- /* Identify multiphase for rail 2 - could be from 0 to 4. */
ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R2);
if (ret < 0)
return ret;
ret &= GENMASK(2, 0);
- return (ret >= 4) ? 4 : ret;
+ return (ret >= data->max_phases[1]) ? data->max_phases[1] : ret;
}
static void mp2975_set_phase_rail1(struct pmbus_driver_info *info)
@@ -353,7 +358,7 @@ mp2975_identify_multiphase(struct i2c_client *client, struct mp2975_data *data,
if (ret < 0)
return ret;
- /* Identify multiphase for rail 1 - could be from 1 to 8. */
+ /* Identify multiphase for rail 1 - could be from 1 to data->max_phases[0]. */
ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R1);
if (ret <= 0)
return ret;
@@ -361,19 +366,19 @@ mp2975_identify_multiphase(struct i2c_client *client, struct mp2975_data *data,
info->phases[0] = ret & GENMASK(3, 0);
/*
- * The device provides a total of 8 PWM pins, and can be configured
+ * The device provides a total of $n PWM pins, and can be configured
* to different phase count applications for rail 1 and rail 2.
- * Rail 1 can be set to 8 phases, while rail 2 can only be set to 4
- * phases at most. When rail 1’s phase count is configured as 0, rail
+ * Rail 1 can be set to $n phases, while rail 2 can be set to less than
+ * that. When rail 1’s phase count is configured as 0, rail
* 1 operates with 1-phase DCM. When rail 2 phase count is configured
* as 0, rail 2 is disabled.
*/
- if (info->phases[0] > MP2975_MAX_PHASE_RAIL1)
+ if (info->phases[0] > data->max_phases[0])
return -EINVAL;
mp2975_set_phase_rail1(info);
- num_phases2 = min(MP2975_MAX_PHASE_RAIL1 - info->phases[0],
- MP2975_MAX_PHASE_RAIL2);
+ num_phases2 = min(data->max_phases[0] - info->phases[0],
+ data->max_phases[1]);
if (info->phases[1] && info->phases[1] <= num_phases2)
mp2975_set_phase_rail2(info, num_phases2);
@@ -671,11 +676,13 @@ static int mp2975_probe(struct i2c_client *client)
else
data->chip_id = i2c_match_id(mp2975_id, client)->driver_data;
- memcpy(&data->info, &mp2975_info, sizeof(*info));
+ memcpy(data->max_phases, mp2975_max_phases[data->chip_id],
+ sizeof(data->max_phases));
+
info = &data->info;
/* Identify multiphase configuration for rail 2. */
- ret = mp2975_identify_multiphase_rail2(client);
+ ret = mp2975_identify_multiphase_rail2(client, data);
if (ret < 0)
return ret;
--
2.41.0
