[PATCH V2] arm64: dts: qcom: sa8775p-ride: Update L4C parameters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



L4c is the supply for UFS vccq, As per UFS spec range of vccq is
1.14V to 1.26V, There are stability issues when operating at
marginal voltage. Hence configure the min and max vccq voltages
to 1.2V.

Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index ab767cfa51ff..26f5a4e0ffed 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -153,8 +153,8 @@
 
 		vreg_l4c: ldo4 {
 			regulator-name = "vreg_l4c";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1300000>;
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			/*
 			 * FIXME: This should have regulator-allow-set-load but
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux