On 10/07/2023 13:37, Praveenkumar I wrote:
IPQ5332 has tsens v2.3.3 peripheral. This patch adds the tsense
node with nvmem cells for calibration data.
Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 113 ++++++++++++++++++++++++++
1 file changed, 113 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 8bfc2db44624..a1e3527178c0 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -150,6 +150,91 @@ qfprom: efuse@a4000 {
reg = <0x000a4000 0x721>;
#address-cells = <1>;
#size-cells = <1>;
+
+ tsens_mode: mode@3e1 {
+ reg = <0x3e1 0x1>;
+ bits = <0 3>;
+ };
+
+ tsens_base0: base0@3e1 {
+ reg = <0x3e1 0x2>;
+ bits = <3 10>;
+ };
+
+ tsens_base1: base1@3e2 {
+ reg = <0x3e2 0x2>;
+ bits = <5 10>;
+ };
+
+ s0_offset: s0_offset@3e4 {
+ reg = <0x3e4 0x1>;
+ bits = <0 4>;
+ };
+
+ s3_offset: s3_offset@3e5 {
+ reg = <0x3e5 0x1>;
+ bits = <4 4>;
+ };
+
+ s4_offset: s4_offset@3e6 {
+ reg = <0x3e6 0x1>;
+ bits = <0 4>;
+ };
+
+ s5_offset: s5_offset@3e6 {
+ reg = <0x3e6 0x1>;
+ bits = <4 4>;
+ };
+
+ s6_offset: s6_offset@3e8 {
+ reg = <0x3e8 0x1>;
+ bits = <0 4>;
+ };
+
+ s7_offset: s7_offset@3e8 {
+ reg = <0x3e8 0x1>;
+ bits = <4 4>;
+ };
+
+ s8_offset: s8_offset@3a4 {
+ reg = <0x3a4 0x1>;
+ bits = <0 4>;
+ };
+
+ s9_offset: s9_offset@3a4 {
+ reg = <0x3a4 0x1>;
+ bits = <4 4>;
+ };
+
+ s10_offset: s10_offset@3a5 {
+ reg = <0x3a5 0x1>;
+ bits = <0 4>;
+ };
+
+ s11_offset: s11_offset@3a5 {
+ reg = <0x3a5 0x1>;
+ bits = <4 4>;
+ };
+
+ s12_offset: s12_offset@3a6 {
+ reg = <0x3a6 0x1>;
+ bits = <0 4>;
+ };
+
+ s13_offset: s13_offset@3a6 {
+ reg = <0x3a6 0x1>;
+ bits = <4 4>;
+ };
+
+ s14_offset: s14_offset@3ad {
+ reg = <0x3ad 0x2>;
+ bits = <7 4>;
+ };
+
+ s15_offset: s0_offset@3ae {
+ reg = <0x3ae 0x1>;
+ bits = <3 4>;
+ };
};
rng: rng@e3000 {
@@ -159,6 +244,34 @@ rng: rng@e3000 {
clock-names = "core";
};
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,ipq5332-tsens";
+ reg = <0x4a9000 0x1000>,
+ <0x4a8000 0x1000>;
+ nvmem-cells = <&tsens_mode>, <&tsens_base0>,
+ <&tsens_base1>, <&s0_offset>,
Please align vertically.
+ <&s3_offset>, <&s4_offset>,
+ <&s5_offset>, <&s6_offset>,
+ <&s7_offset>, <&s8_offset>,
+ <&s9_offset>, <&s10_offset>,
+ <&s11_offset>, <&s12_offset>,
+ <&s13_offset>, <&s14_offset>,
+ <&s15_offset>;
+ nvmem-cell-names = "mode", "base0",
+ "base1", "s0_offset",
And here.
+ "s3_offset", "s4_offset",
+ "s5_offset", "s6_offset",
+ "s7_offset", "s8_offset",
+ "s9_offset", "s10_offset",
+ "s11_offset", "s12_offset",
+ "s13_offset", "s14_offset",
+ "s15_offset";
+ interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "combined";
+ #qcom,sensors = <16>;
+ #thermal-sensor-cells = <1>;
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5332-tlmm";
reg = <0x01000000 0x300000>;
--
With best wishes
Dmitry
