IPQ5332 uses tsens v2.3.3 IP with combined interrupt for upper/lower and critical. IPQ5332 does not have RPM and kernel has to take care of TSENS enablement and calibration. This patch series adds the sensor enablement and calibration support. On top, adds IPQ5332 TSENS support. Praveenkumar I (6): dt-bindings: thermal: tsens: Add nvmem cells for calibration data thermal/drivers/tsens: Add TSENS enable and calibration support for V2 dt-bindings: thermal: tsens: Add ipq5332 compatible arm64: dts: qcom: ipq5332: Add tsens node arm64: dts: qcom: ipq5332: Add thermal zone nodes thermal/drivers/tsens: Add IPQ5332 support .../bindings/thermal/qcom-tsens.yaml | 34 +++- arch/arm64/boot/dts/qcom/ipq5332.dtsi | 185 ++++++++++++++++++ drivers/thermal/qcom/tsens-v2.c | 129 ++++++++++++ drivers/thermal/qcom/tsens.c | 40 +++- drivers/thermal/qcom/tsens.h | 58 +++++- 5 files changed, 440 insertions(+), 6 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
