Use arm-gic.h and irq.h for interrupt description. It helps to improve readability of device tree file. Suggested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Signed-off-by: Michal Simek <michal.simek@xxxxxxx> --- Discussed at https://lore.kernel.org/r/20230621141307.GC18703@xxxxxxxxxxxxxxxxxxxxxxxxxx --- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 185 +++++++++++++++---------- 1 file changed, 110 insertions(+), 75 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 74898f3a3537..b61fc99cd911 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/power/xlnx-zynqmp-power.h> #include <dt-bindings/reset/xlnx-zynqmp-resets.h> @@ -131,7 +133,7 @@ zynqmp_ipi: zynqmp_ipi { bootph-all; compatible = "xlnx,zynqmp-ipi-mailbox"; interrupt-parent = <&gic>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; xlnx,ipi-id = <0>; #address-cells = <2>; #size-cells = <2>; @@ -161,10 +163,10 @@ dcc: dcc { pmu { compatible = "arm,armv8-pmuv3"; interrupt-parent = <&gic>; - interrupts = <0 143 4>, - <0 144 4>, - <0 145 4>, - <0 146 4>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, @@ -187,7 +189,7 @@ zynqmp_power: zynqmp-power { bootph-all; compatible = "xlnx,zynqmp-power"; interrupt-parent = <&gic>; - interrupts = <0 35 4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>; mbox-names = "tx", "rx"; }; @@ -231,10 +233,10 @@ modepin_gpio: gpio { timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; fpga_full: fpga-full { @@ -274,7 +276,7 @@ can0: can@ff060000 { status = "disabled"; clock-names = "can_clk", "pclk"; reg = <0x0 0xff060000 0x0 0x1000>; - interrupts = <0 23 4>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; @@ -286,7 +288,7 @@ can1: can@ff070000 { status = "disabled"; clock-names = "can_clk", "pclk"; reg = <0x0 0xff070000 0x0 0x1000>; - interrupts = <0 24 4>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; @@ -305,11 +307,11 @@ pmu@9000 { compatible = "arm,cci-400-pmu,r1"; reg = <0x9000 0x5000>; interrupt-parent = <&gic>; - interrupts = <0 123 4>, - <0 123 4>, - <0 123 4>, - <0 123 4>, - <0 123 4>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -319,7 +321,7 @@ fpd_dma_chan1: dma-controller@fd500000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd500000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 124 4>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -332,7 +334,7 @@ fpd_dma_chan2: dma-controller@fd510000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd510000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 125 4>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -345,7 +347,7 @@ fpd_dma_chan3: dma-controller@fd520000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd520000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 126 4>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -358,7 +360,7 @@ fpd_dma_chan4: dma-controller@fd530000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd530000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 127 4>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -371,7 +373,7 @@ fpd_dma_chan5: dma-controller@fd540000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd540000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 128 4>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -384,7 +386,7 @@ fpd_dma_chan6: dma-controller@fd550000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd550000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 129 4>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -397,7 +399,7 @@ fpd_dma_chan7: dma-controller@fd560000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd560000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 130 4>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -410,7 +412,7 @@ fpd_dma_chan8: dma-controller@fd570000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd570000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 131 4>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <128>; @@ -427,7 +429,7 @@ gic: interrupt-controller@f9010000 { <0x0 0xf9060000 0x0 0x20000>; interrupt-controller; interrupt-parent = <&gic>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; gpu: gpu@fd4b0000 { @@ -435,8 +437,12 @@ gpu: gpu@fd4b0000 { compatible = "xlnx,zynqmp-mali", "arm,mali-400"; reg = <0x0 0xfd4b0000 0x0 0x10000>; interrupt-parent = <&gic>; - interrupts = <0 132 4>, <0 132 4>, <0 132 4>, - <0 132 4>, <0 132 4>, <0 132 4>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1"; clock-names = "bus", "core"; power-domains = <&zynqmp_firmware PD_GPU>; @@ -451,7 +457,7 @@ lpd_dma_chan1: dma-controller@ffa80000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffa80000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 77 4>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -464,7 +470,7 @@ lpd_dma_chan2: dma-controller@ffa90000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffa90000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -477,7 +483,7 @@ lpd_dma_chan3: dma-controller@ffaa0000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffaa0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 79 4>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -490,7 +496,7 @@ lpd_dma_chan4: dma-controller@ffab0000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffab0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 80 4>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -503,7 +509,7 @@ lpd_dma_chan5: dma-controller@ffac0000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffac0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 81 4>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -516,7 +522,7 @@ lpd_dma_chan6: dma-controller@ffad0000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffad0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 82 4>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -529,7 +535,7 @@ lpd_dma_chan7: dma-controller@ffae0000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffae0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 83 4>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -542,7 +548,7 @@ lpd_dma_chan8: dma-controller@ffaf0000 { compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffaf0000 0x0 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 84 4>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clock-names = "clk_main", "clk_apb"; #dma-cells = <1>; xlnx,bus-width = <64>; @@ -554,7 +560,7 @@ mc: memory-controller@fd070000 { compatible = "xlnx,zynqmp-ddrc-2.40a"; reg = <0x0 0xfd070000 0x0 0x30000>; interrupt-parent = <&gic>; - interrupts = <0 112 4>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; }; nand0: nand-controller@ff100000 { @@ -563,7 +569,7 @@ nand0: nand-controller@ff100000 { reg = <0x0 0xff100000 0x0 0x1000>; clock-names = "controller", "bus"; interrupt-parent = <&gic>; - interrupts = <0 14 4>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; iommus = <&smmu 0x872>; @@ -574,7 +580,8 @@ gem0: ethernet@ff0b0000 { compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 57 4>, <0 57 4>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0b0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; @@ -589,7 +596,8 @@ gem1: ethernet@ff0c0000 { compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 59 4>, <0 59 4>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0c0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; @@ -604,7 +612,8 @@ gem2: ethernet@ff0d0000 { compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 61 4>, <0 61 4>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0d0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; @@ -619,7 +628,8 @@ gem3: ethernet@ff0e0000 { compatible = "xlnx,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 63 4>, <0 63 4>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0e0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; @@ -636,7 +646,7 @@ gpio: gpio@ff0a0000 { #gpio-cells = <0x2>; gpio-controller; interrupt-parent = <&gic>; - interrupts = <0 16 4>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0xff0a0000 0x0 0x1000>; @@ -647,7 +657,7 @@ i2c0: i2c@ff020000 { compatible = "cdns,i2c-r1p14"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 17 4>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <400000>; reg = <0x0 0xff020000 0x0 0x1000>; #address-cells = <1>; @@ -659,7 +669,7 @@ i2c1: i2c@ff030000 { compatible = "cdns,i2c-r1p14"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 18 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <400000>; reg = <0x0 0xff030000 0x0 0x1000>; #address-cells = <1>; @@ -676,11 +686,11 @@ pcie: pcie@fd0e0000 { msi-controller; device_type = "pci"; interrupt-parent = <&gic>; - interrupts = <0 118 4>, - <0 117 4>, - <0 116 4>, - <0 115 4>, /* MSI_1 [63...32] */ - <0 114 4>; /* MSI_0 [31...0] */ + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, /* MSI_1 [63...32] */ + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; /* MSI_0 [31...0] */ interrupt-names = "misc", "dummy", "intx", "msi1", "msi0"; msi-parent = <&pcie>; @@ -710,7 +720,7 @@ qspi: spi@ff0f0000 { compatible = "xlnx,zynqmp-qspi-1.0"; status = "disabled"; clock-names = "ref_clk", "pclk"; - interrupts = <0 15 4>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; num-cs = <1>; reg = <0x0 0xff0f0000 0x0 0x1000>, @@ -735,7 +745,8 @@ rtc: rtc@ffa60000 { status = "disabled"; reg = <0x0 0xffa60000 0x0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 26 4>, <0 27 4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "alarm", "sec"; calibration = <0x7FFF>; }; @@ -745,7 +756,7 @@ sata: ahci@fd0c0000 { status = "disabled"; reg = <0x0 0xfd0c0000 0x0 0x2000>; interrupt-parent = <&gic>; - interrupts = <0 133 4>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&zynqmp_firmware PD_SATA>; resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, @@ -757,7 +768,7 @@ sdhci0: mmc@ff160000 { compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 48 4>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff160000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; iommus = <&smmu 0x870>; @@ -772,7 +783,7 @@ sdhci1: mmc@ff170000 { compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 49 4>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff170000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; iommus = <&smmu 0x871>; @@ -789,18 +800,30 @@ smmu: iommu@fd800000 { status = "disabled"; #global-interrupts = <1>; interrupt-parent = <&gic>; - interrupts = <0 155 4>, - <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>, - <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>, - <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>, - <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; }; spi0: spi@ff040000 { compatible = "cdns,spi-r1p6"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 19 4>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff040000 0x0 0x1000>; clock-names = "ref_clk", "pclk"; #address-cells = <1>; @@ -812,7 +835,7 @@ spi1: spi@ff050000 { compatible = "cdns,spi-r1p6"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 20 4>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff050000 0x0 0x1000>; clock-names = "ref_clk", "pclk"; #address-cells = <1>; @@ -824,7 +847,9 @@ ttc0: timer@ff110000 { compatible = "cdns,ttc"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 36 4>, <0 37 4>, <0 38 4>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff110000 0x0 0x1000>; timer-width = <32>; power-domains = <&zynqmp_firmware PD_TTC_0>; @@ -834,7 +859,9 @@ ttc1: timer@ff120000 { compatible = "cdns,ttc"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 39 4>, <0 40 4>, <0 41 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff120000 0x0 0x1000>; timer-width = <32>; power-domains = <&zynqmp_firmware PD_TTC_1>; @@ -844,7 +871,9 @@ ttc2: timer@ff130000 { compatible = "cdns,ttc"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 42 4>, <0 43 4>, <0 44 4>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff130000 0x0 0x1000>; timer-width = <32>; power-domains = <&zynqmp_firmware PD_TTC_2>; @@ -854,7 +883,9 @@ ttc3: timer@ff140000 { compatible = "cdns,ttc"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 45 4>, <0 46 4>, <0 47 4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff140000 0x0 0x1000>; timer-width = <32>; power-domains = <&zynqmp_firmware PD_TTC_3>; @@ -865,7 +896,7 @@ uart0: serial@ff000000 { compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 21 4>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff000000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; power-domains = <&zynqmp_firmware PD_UART_0>; @@ -876,7 +907,7 @@ uart1: serial@ff010000 { compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 22 4>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff010000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; power-domains = <&zynqmp_firmware PD_UART_1>; @@ -901,7 +932,9 @@ dwc3_0: usb@fe200000 { reg = <0x0 0xfe200000 0x0 0x40000>; interrupt-parent = <&gic>; interrupt-names = "host", "peripheral", "otg"; - interrupts = <0 65 4>, <0 65 4>, <0 69 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clock-names = "bus_early", "ref"; iommus = <&smmu 0x860>; snps,quirk-frame-length-adjustment = <0x20>; @@ -928,7 +961,9 @@ dwc3_1: usb@fe300000 { reg = <0x0 0xfe300000 0x0 0x40000>; interrupt-parent = <&gic>; interrupt-names = "host", "peripheral", "otg"; - interrupts = <0 70 4>, <0 70 4>, <0 74 4>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "bus_early", "ref"; iommus = <&smmu 0x861>; snps,quirk-frame-length-adjustment = <0x20>; @@ -941,7 +976,7 @@ watchdog0: watchdog@fd4d0000 { compatible = "cdns,wdt-r1p2"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 113 1>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; reg = <0x0 0xfd4d0000 0x0 0x1000>; timeout-sec = <60>; reset-on-timeout; @@ -951,7 +986,7 @@ lpd_watchdog: watchdog@ff150000 { compatible = "cdns,wdt-r1p2"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 52 1>; + interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>; reg = <0x0 0xff150000 0x0 0x1000>; timeout-sec = <10>; }; @@ -960,7 +995,7 @@ xilinx_ams: ams@ffa50000 { compatible = "xlnx,zynqmp-ams"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 56 4>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xffa50000 0x0 0x800>; #address-cells = <1>; #size-cells = <1>; @@ -986,7 +1021,7 @@ zynqmp_dpdma: dma-controller@fd4c0000 { compatible = "xlnx,zynqmp-dpdma"; status = "disabled"; reg = <0x0 0xfd4c0000 0x0 0x1000>; - interrupts = <0 122 4>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; clock-names = "axi_clk"; power-domains = <&zynqmp_firmware PD_DP>; @@ -1002,7 +1037,7 @@ zynqmp_dpsub: display@fd4a0000 { <0x0 0xfd4ab000 0x0 0x1000>, <0x0 0xfd4ac000 0x0 0x1000>; reg-names = "dp", "blend", "av_buf", "aud"; - interrupts = <0 119 4>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; clock-names = "dp_apb_clk", "dp_aud_clk", "dp_vtc_pixel_clk_in"; -- 2.36.1
