Document the System Control registers regions found on all Amlogic SoC families and it's clock, power, pinctrl and phy subnodes. The regions has various independent registers tied to other hardware devices, thus the syscon compatible. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> --- .../soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml | 160 +++++++++++++++++++++ 1 file changed, 160 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml new file mode 100644 index 000000000000..16977e4e4357 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson System Control registers + +maintainers: + - Neil Armstrong <neil.armstrong@xxxxxxxxxx> + +properties: + compatible: + items: + - enum: + - amlogic,meson-gx-hhi-sysctrl + - amlogic,meson-gx-ao-sysctrl + - amlogic,meson-axg-hhi-sysctrl + - amlogic,meson-axg-ao-sysctrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + type: object + + power-controller: + $ref: /schemas/power/amlogic,meson-ee-pwrc.yaml + + pinctrl: + type: object + + phy: + type: object + +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-hhi-sysctrl + - amlogic,meson-axg-hhi-sysctrl + then: + properties: + clock-controller: + $ref: /schemas/clock/amlogic,gxbb-clkc.yaml# + + required: + - power-controller + + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-ao-sysctrl + - amlogic,meson-axg-ao-sysctrl + then: + properties: + clock-controller: + $ref: /schemas/clock/amlogic,gxbb-aoclkc.yaml# + + power-controller: false + phy: false + + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-hhi-sysctrl + then: + properties: + phy: false + + - if: + properties: + compatible: + enum: + - amlogic,meson-axg-hhi-sysctrl + then: + properties: + phy: + oneOf: + - $ref: /schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml + - $ref: /schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml + +required: + - compatible + - reg + - clock-controller + +additionalProperties: false + +examples: + - | + bus@c883c000 { + compatible = "simple-bus"; + reg = <0xc883c000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc883c000 0x2000>; + + sysctrl: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; + reg = <0 0x400>; + + clock-controller { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + + power-controller { + compatible = "amlogic,meson-gxbb-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + + resets = <&reset_viu>, + <&reset_venc>, + <&reset_vcbus>, + <&reset_bt656>, + <&reset_dvin>, + <&reset_rdma>, + <&reset_venci>, + <&reset_vencp>, + <&reset_vdac>, + <&reset_vdi6>, + <&reset_vencl>, + <&reset_vid_lock>; + reset-names = "viu", "venc", "vcbus", "bt656", "dvin", + "rdma", "venci", "vencp", "vdac", "vdi6", + "vencl", "vid_lock"; + clocks = <&clk_vpu>, <&clk_vapb>; + clock-names = "vpu", "vapb"; + }; + }; + }; + + bus@c8100000 { + compatible = "simple-bus"; + reg = <0xc8100000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8100000 0x100000>; + + sysctrl_AO: system-controller@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; + reg = <0 0x100>; + + clock-controller { + compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xtal>, <&clk81>; + clock-names = "xtal", "mpeg-clk"; + }; + }; + }; -- 2.34.1
