On Wed, Jul 05, 2023 at 01:47:05PM +0530, Mrinmay Sarkar wrote: > Update the relavent DT bindings for PCIe, add new config to the phy > driver add pcie and phy nodes to the .dtsi file and enable then in > board .dts file for the sa8775p-ride platform. > > Mrinmay Sarkar (6): > dt-bindings: PCI: qcom: Add sa8775p compatible > dt-bindings: phy: qcom,qmp: Add sa8775p QMP PCIe PHY > PCI: qcom: Add support for sa8775p SoC > phy: qcom-qmp-pcie: add support for sa8775p > arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes > arm64: dts: qcom: sa8775p-ride: enable pcie nodes Please note that the dts patches should come before driver patches. - Mani > > .../devicetree/bindings/pci/qcom,pcie.yaml | 28 ++ > .../phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 19 +- > arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 68 ++++ > arch/arm64/boot/dts/qcom/sa8775p.dtsi | 201 ++++++++++- > drivers/pci/controller/dwc/pcie-qcom.c | 1 + > drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 328 ++++++++++++++++++ > .../qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h | 1 + > .../phy-qcom-qmp-qserdes-txrx-v5_20.h | 2 + > 8 files changed, 645 insertions(+), 3 deletions(-) > > -- > 2.39.2 > -- மணிவண்ணன் சதாசிவம்
