On 7/3/23 15:44, Roger Quadros wrote:
On 03/07/2023 14:56, Julien Panis wrote:
On 6/30/23 21:40, Roger Quadros wrote:
Hi,
On 30/06/2023 11:30, Julien Panis wrote:
Hello Tony,
On 6/30/23 09:20, Tony Lindgren wrote:
Hi,
* Julien Panis <jpanis@xxxxxxxxxxxx> [230629 13:10]:
This series configures usb0 dr_mode as 'peripheral' for am335x-evm,
am335x-evmsk, and am335x-icev2. This USB port is mainly used for
RNDIS and DFU.
Is this a mini-B connector? Just wondering if it was originally attempted
to be configured as OTG or how it ended up with a host configuration..
It's a micro USB-AB connector.
I don't know how it ended up with a host configuration, it looks like an oversight.
Maybe Vignesh or Nishanth can confirm (?)
usb0 role should be "otg".
It is rightly so in Linux DT. am33xx.dtsi contains "otg" and all AM335x board files inherit from it.
So I don't think setting it to "peripheral" in u-boot is the right thing to do.
This series is for kernel (not for u-boot).
Why is it a problem to set usb0 as 'peripheral' in kernel for the 3 board dts ?
With usb0 not set as 'peripheral', the 3 boards (am335x-evm, evm-sk, icev2)
do not boot with uboot 2023.04. This error is returned, with LOG_LEVEL=5:
No USB device found
USB ether init failed
initcall sequence 8ffdbba4 failed at call 808024d9 (err=-19)
### ERROR ### Please RESET the board ###
This error is also returned with usb0 as 'otg'.
This error is at u-boot correct? This will need further investigation.
Does it function correctly in Linux when kept as 'otg'?
This error is at u-boot level, indeed. I add Tom Rini to this thread, since he
was involved in the discussion here:
https://lore.kernel.org/all/20230621-fix_usb_ether_init-v2-0-ff121f0e8d7a@xxxxxxxxxxxx/
If dr_mode is set as 'peripheral' in '<board>-u-boot.dtsi' and kept as 'otg'
in linux, it functions correctly in linux.
