On 2.07.2023 15:43, Dmitry Baryshkov wrote:
> Change PM8921 node labels to start with pm8921_ prefix, following other
> Qualcomm PMIC device nodes.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
> index 913bc6afd0a1..6b8d90d02146 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
> @@ -264,7 +264,7 @@ ssbi@500000 {
> reg = <0x500000 0x1000>;
> qcom,controller-type = "pmic-arbiter";
>
> - pmicintc: pmic {
> + pm8921: pmic {
> compatible = "qcom,pm8921";
> interrupt-parent = <&msmgpio>;
> interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
> @@ -276,7 +276,7 @@ pmicintc: pmic {
> pwrkey@1c {
> compatible = "qcom,pm8921-pwrkey";
> reg = <0x1c>;
> - interrupt-parent = <&pmicintc>;
> + interrupt-parent = <&pm8921>;
> interrupts = <50 IRQ_TYPE_EDGE_RISING>,
> <51 IRQ_TYPE_EDGE_RISING>;
> debounce = <15625>;
> @@ -286,7 +286,7 @@ pwrkey@1c {
> pm8921_keypad: keypad@148 {
> compatible = "qcom,pm8921-keypad";
> reg = <0x148>;
> - interrupt-parent = <&pmicintc>;
> + interrupt-parent = <&pm8921>;
> interrupts = <74 IRQ_TYPE_EDGE_RISING>,
> <75 IRQ_TYPE_EDGE_RISING>;
> debounce = <15>;
> @@ -296,7 +296,7 @@ pm8921_keypad: keypad@148 {
>
> rtc@11d {
> compatible = "qcom,pm8921-rtc";
> - interrupt-parent = <&pmicintc>;
> + interrupt-parent = <&pm8921>;
> interrupts = <39 IRQ_TYPE_EDGE_RISING>;
> reg = <0x11d>;
> allow-set-time;
