Change PM8921 node labels to start with pm8921_ prefix, following other
Qualcomm PMIC device nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 913bc6afd0a1..6b8d90d02146 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -264,7 +264,7 @@ ssbi@500000 {
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pmicintc: pmic {
+ pm8921: pmic {
compatible = "qcom,pm8921";
interrupt-parent = <&msmgpio>;
interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
@@ -276,7 +276,7 @@ pmicintc: pmic {
pwrkey@1c {
compatible = "qcom,pm8921-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8921>;
interrupts = <50 IRQ_TYPE_EDGE_RISING>,
<51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
@@ -286,7 +286,7 @@ pwrkey@1c {
pm8921_keypad: keypad@148 {
compatible = "qcom,pm8921-keypad";
reg = <0x148>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8921>;
interrupts = <74 IRQ_TYPE_EDGE_RISING>,
<75 IRQ_TYPE_EDGE_RISING>;
debounce = <15>;
@@ -296,7 +296,7 @@ pm8921_keypad: keypad@148 {
rtc@11d {
compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8921>;
interrupts = <39 IRQ_TYPE_EDGE_RISING>;
reg = <0x11d>;
allow-set-time;
--
2.39.2
