On 2.07.2023 15:43, Dmitry Baryshkov wrote:
> Change PM8921 node labels to start with pm8921_ prefix, following other
> Qualcomm PMIC device nodes.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
> index 4f4393e11580..5ffb960d09b4 100644
> --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
> @@ -332,13 +332,13 @@ scm {
> */
> iio-hwmon {
> compatible = "iio-hwmon";
> - io-channels = <&xoadc 0x00 0x01>, /* Battery */
> - <&xoadc 0x00 0x02>, /* DC in (charger) */
> - <&xoadc 0x00 0x04>, /* VPH the main system voltage */
> - <&xoadc 0x00 0x0b>, /* Die temperature */
> - <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
> - <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
> - <&xoadc 0x00 0x0e>; /* Charger temperature */
> + io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
> + <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
> + <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
> + <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
> + <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
> + <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
> + <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
> };
>
> soc: soc {
> @@ -714,7 +714,7 @@ ssbi@500000 {
> reg = <0x00500000 0x1000>;
> qcom,controller-type = "pmic-arbiter";
>
> - pmicintc: pmic {
> + pm8921: pmic {
> compatible = "qcom,pm8921";
> interrupt-parent = <&tlmm_pinmux>;
> interrupts = <74 8>;
> @@ -749,7 +749,7 @@ pm8921_mpps: mpps@50 {
>
> rtc@11d {
> compatible = "qcom,pm8921-rtc";
> - interrupt-parent = <&pmicintc>;
> + interrupt-parent = <&pm8921>;
> interrupts = <39 1>;
> reg = <0x11d>;
> allow-set-time;
> @@ -758,16 +758,16 @@ rtc@11d {
> pwrkey@1c {
> compatible = "qcom,pm8921-pwrkey";
> reg = <0x1c>;
> - interrupt-parent = <&pmicintc>;
> + interrupt-parent = <&pm8921>;
> interrupts = <50 1>, <51 1>;
> debounce = <15625>;
> pull-up;
> };
>
> - xoadc: xoadc@197 {
> + pm8921_xoadc: xoadc@197 {
> compatible = "qcom,pm8921-adc";
> reg = <0x197>;
> - interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
> + interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <2>;
> #size-cells = <0>;
> #io-channel-cells = <2>;
