These touchscreen ICs support SPI, I2C and I3C interface, up to 10 finger touch, stylus and gestures events. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. Support for advanced features like: - Firmware & config update - Stylus events - Gestures events - Previous revisions support (BerlinA or BerlinB) is not included in current version. The current support will work with currently flashed firmware and config, and bail out if firmware or config aren't flashed yet. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> --- Changes in v4: - Core updates: - drop kconfig depends, deps will be handled by _SPI and _I2C - change power_on() error labels - print errors on all dev_err() prints - remove useless default variable initialization - switch irq touch checksum error to dev_err() - add Jeff's review tag - I2C changes - change REGMAP_I2C Kconfig from depends to select - add Jeff's review tag - SPI changes - add select REGMAP to Kconfig - added GOODIX_BERLIN_ prefix to defines - switched from ret to error - add Jeff's review tag - Link to v3: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v3-0-f0577cead709@xxxxxxxxxx Changes in v3: - Another guge cleanups after Jeff's review: - appended goodix_berlin_ before all defines - removed some unused defines - removed retries on most of read functions, can be added back later - added __le to ic_info structures - reworked and simplified irq handling, dropped enum and ts_event structs - added struct for touch data - simplified and cleaned goodix_berlin_check_checksum & goodix_berlin_is_dummy_data - moved touch_data_addr to the end of the main code_data - reworked probe to get_irq last and right before setip input device - cleaned probe by removing the "cd->dev" - added short paragraph to justify new driver for berlin devices - defined all offsets & masks - Added bindings review tag - Link to v2: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v2-0-26bc8fe1e90e@xxxxxxxxxx Changes in v2: - Huge cleanups after Jeff's review: - switch to error instead of ret - drop dummy vendor/product ids - drop unused defined/enums - drop unused ic_info and only keep needes values - cleanup namings and use goodix_berlin_ everywhere - fix regulator setup - fix default variables value when assigned afterwars - removed indirections - dropped debugfs - cleaned input_dev setup - dropped _remove() - sync'ed i2c and spi drivers - fixed yaml bindings - Link to v1: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v1-0-4a0741b8aefd@xxxxxxxxxx --- Neil Armstrong (4): dt-bindings: input: document Goodix Berlin Touchscreen IC input: touchscreen: add core support for Goodix Berlin Touchscreen IC input: touchscreen: add I2C support for Goodix Berlin Touchscreen IC input: touchscreen: add SPI support for Goodix Berlin Touchscreen IC .../bindings/input/touchscreen/goodix,gt9916.yaml | 95 ++++ drivers/input/touchscreen/Kconfig | 31 ++ drivers/input/touchscreen/Makefile | 3 + drivers/input/touchscreen/goodix_berlin.h | 159 ++++++ drivers/input/touchscreen/goodix_berlin_core.c | 581 +++++++++++++++++++++ drivers/input/touchscreen/goodix_berlin_i2c.c | 69 +++ drivers/input/touchscreen/goodix_berlin_spi.c | 173 ++++++ 7 files changed, 1111 insertions(+) --- base-commit: 6db29e14f4fb7bce9eb5290288e71b05c2b0d118 change-id: 20230606-topic-goodix-berlin-upstream-initial-ba97e8ec8f4c Best regards, -- Neil Armstrong <neil.armstrong@xxxxxxxxxx>
