On 27.06.2023 10:28, Luca Weiss wrote:
> With the ICE driver now merged let's convert the ufs node to use the new
> style.
>
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sm8450.dtsi | 22 +++++++++++++---------
> 1 file changed, 13 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 5cd7296c7660..79627117a776 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -4120,9 +4120,7 @@ system-cache-controller@19200000 {
> ufs_mem_hc: ufshc@1d84000 {
> compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
> "jedec,ufs-2.0";
> - reg = <0 0x01d84000 0 0x3000>,
> - <0 0x01d88000 0 0x8000>;
> - reg-names = "std", "ice";
> + reg = <0 0x01d84000 0 0x3000>;
> interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> phys = <&ufs_mem_phy_lanes>;
> phy-names = "ufsphy";
> @@ -4147,8 +4145,7 @@ ufs_mem_hc: ufshc@1d84000 {
> "ref_clk",
> "tx_lane0_sync_clk",
> "rx_lane0_sync_clk",
> - "rx_lane1_sync_clk",
> - "ice_core_clk";
> + "rx_lane1_sync_clk";
> clocks =
> <&gcc GCC_UFS_PHY_AXI_CLK>,
> <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> @@ -4157,8 +4154,7 @@ ufs_mem_hc: ufshc@1d84000 {
> <&rpmhcc RPMH_CXO_CLK>,
> <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
> - <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> freq-table-hz =
> <75000000 300000000>,
> <0 0>,
> @@ -4167,8 +4163,9 @@ ufs_mem_hc: ufshc@1d84000 {
> <75000000 300000000>,
> <0 0>,
> <0 0>,
> - <0 0>,
> - <75000000 300000000>;
> + <0 0>;
> + qcom,ice = <&ice>;
> +
> status = "disabled";
> };
>
> @@ -4198,6 +4195,13 @@ ufs_mem_phy_lanes: phy@1d87400 {
> };
> };
>
> + ice: crypto@1d88000 {
> + compatible = "qcom,sm8450-inline-crypto-engine",
> + "qcom,inline-crypto-engine";
> + reg = <0 0x01d88000 0 0x8000>;
> + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> + };
> +
> cryptobam: dma-controller@1dc4000 {
> compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> reg = <0 0x01dc4000 0 0x28000>;
>
