On 25.06.2023 21:18, Marijn Suijten wrote:
> On 2023-06-24 03:42:46, Konrad Dybcio wrote:
>> On 24.06.2023 02:40, Marijn Suijten wrote:
>>> Bring up the SM6125 DPU now that all preliminary series (such as INTF
>>> TE) have been merged (for me to test the hardware properly)
>> We should not repeat the same mistake in the future.. Finding a
>> balance between releasing early and releasing what we can declare
>> working and tested code is hard, but we waaaaaaaay overstayed on
>> this one..
>
> I don't understand what you mean by "mistake" at all. Yes the DPU
> catalog portion of this series sat in my local branch for a very long
> time. Yes it had to be rebased on top of conflicts many many times.
>
> However, that time has also been used to fix and extend DPU where
> necessary, instead of submitting a half-broken or half-incomplete
> catalog entry...
>
> Re "we overstayed": you could have asked to clean up and send my patch,
> so I don't take this as a mistake on my part as you are completely aware
> of my time schedule ;)
I didn't mean to pick on you. I just wanted to emphasize that a more
upstream-forward approach would have saved us quite some time on the
rebasing and cleaning-up front.
>
>> Konrad
>> , and most
>
> Also here, don't forget to re-quote my message if you break half-way in
> the line.
Ugh. All the time I've been doing this I thought thunderfox was smart
enough to do it for me. Apparently not and you're the 1st one to point
that out.
Konrad
>
>>> other conflicting work (barring ongoing catalog *improvements*) has made
>>> its way in as well or is still being discussed.
>>
>>>
>>> The second part of the series complements that by immediately utilizing
>>> this hardware in DT, and even enabling the MDSS/DSI nodes complete with
>>> a 6.0" 1080x2520 panel for Sony's Seine PDX201 (Xperia 10 II).
>>>
>>> The last patch ("sm6125-seine: Configure MDSS, DSI and panel") depends
>>> on (an impending v2 of) my Sony panel collection series [1].
>>>
>>> [1]: https://lore.kernel.org/linux-arm-msm/20230521-drm-panels-sony-v1-0-541c341d6bee@xxxxxxxxxxxxxx/
>>>
>>> ---
>>> Marijn Suijten (15):
>>> arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg
>>> dt-bindings: clock: qcom,dispcc-sm6125: Remove unused GCC_DISP_AHB_CLK
>>> dt-bindings: clock: qcom,dispcc-sm6125: Require GCC PLL0 DIV clock
>>> dt-bindings: clock: qcom,dispcc-sm6125: Allow power-domains property
>>> dt-bindings: display/msm: dsi-controller-main: Document SM6125
>>> dt-bindings: display/msm: sc7180-dpu: Describe SM6125
>>> dt-bindings: display/msm: Add SM6125 MDSS
>>> drm/msm/dpu: Add SM6125 support
>>> drm/msm/mdss: Add SM6125 support
>>> dt-bindings: msm: dsi-phy-14nm: Document SM6125 variant
>>> drm/msm/dsi: Add 14nm phy configuration for SM6125
>>> arm64: dts: qcom: sm6125: Switch fixed xo_board clock to RPM XO clock
>>> arm64: dts: qcom: sm6125: Add dispcc node
>>> arm64: dts: qcom: sm6125: Add display hardware nodes
>>> arm64: dts: qcom: sm6125-seine: Configure MDSS, DSI and panel
>>>
>>> .../bindings/clock/qcom,dispcc-sm6125.yaml | 17 +-
>>> .../bindings/display/msm/dsi-controller-main.yaml | 2 +
>>> .../bindings/display/msm/dsi-phy-14nm.yaml | 1 +
>>> .../bindings/display/msm/qcom,sc7180-dpu.yaml | 1 +
>>> .../bindings/display/msm/qcom,sm6125-mdss.yaml | 206 +++++++++++++++++
>>> .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 59 +++++
>>> arch/arm64/boot/dts/qcom/sm6125.dtsi | 244 +++++++++++++++++++--
>>> .../gpu/drm/msm/disp/dpu1/catalog/dpu_5_4_sm6125.h | 173 +++++++++++++++
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 6 +
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
>>> drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +
>>> drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
>>> drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 15 ++
>>> drivers/gpu/drm/msm/msm_mdss.c | 8 +
>>> 15 files changed, 712 insertions(+), 25 deletions(-)
>>> ---
>>> base-commit: 8d2be868b42c08290509c60515865f4de24ea704
>>> change-id: 20230624-sm6125-dpu-aedc9637ee7b
>>>
>>> Best regards,
