This RFC re-opens an old discussion regarding channel scaling management in STM32 DFSDM driver [1] The DFSDM is a peripheral provided by the STM32MP1x SoC family. One objective is also to prepare the introduction of its successor in the STM32MP12x SoC family: the MDF (Multi-function Digital Filter). The MDF driver will have the same requirements as the DFSDM regarding channel scaling management. So, the solution proposed here will apply also for the future MDF driver. [1] https://patchwork.kernel.org/project/linux-iio/patch/20200204101008.11411-5-olivier.moysan@xxxxxx/ As a short reminder of our previous discussion, the two main options emerging were the following ones: - Option1: Use the DFSDM as an hardware accelerator and expose the scaled channels on SD modulator side. Drawbak: this solution is leading to an very complex datapath, especially for scan mode. - Option2: Introduce a new IIO device type (so-called backend) Retrieve scaling information from SD modulator scaling to expose a single IIO device on DFSDM side. This solution is derivated from rcar-gyroadc example, but with a more standard approach. This was discussed in https://lore.kernel.org/lkml/20210919191414.09270f4e@jic23-huawei/ The patchset proposed in this RFC implements option2 (backend) solution. These patches provide a minimal API implemented as a template. The intented use of this API is illustrated through the DFSDM channel scaling support basic implementation. For sake of simplicity I did not include the related DT binding in this serie. Below are some use case examples. * DFSDM with SD modulator backend: ------------------------------- This use case corresponds to the example implemented in this RFC. The channel attributes are retrieved from backend by the dfsdm, and the resulting scaling is exposed through DFSDM IIO device sysfs - Single channel: +-------------+ ch attr +--------+ sysfs (compound scaling) | sd0 backend | ---------> | dfsdm0 | --------------------------> +-------------+ +--------+ - Scan mode: +-------------+ ch attr +-------------+ sysfs (compound scaling) | sd1 backend | ---------> | dfsdm1 | --------------------------> +-------------+ +-------------+ ^ | +-------------+ ch attr | | sd2 backend |--------------+ +-------------+ * Voltage divider in front of an adc: ---------------------------------- By way of example, here is a comparison on scaling management with a iio-rescale device, and how it could be managed with a backend device. - iio-rescale implementation Scaling is exposed both on ADC and iio-rescale IIO devices. On iio-rescale device we get the compound scaling +---------------------------+ ch attr +------+ sysfs | iio-rescale (div) | <--------- | adc0 | -------> +---------------------------+ +------+ | | sysfs (compound scaling) v - Backend implementation: Compound scaling is exposed on ADC IIO device. No scaling exposed on backend device +---------------+ ch attr +------+ sysfs (compound scaling) | backend (div) | ---------> | adc0 | --------------------------> +---------------+ +------+ * Cascaded backends: ----------------- Backends may be cascaded to allow computation of the whole chain scaling This is not part of this RFC, but it is identified as a potential future use case. +---------------+ attr +-------------+ attr +--------+ sysfs | backend (div) | ------> | sd0 backend | ------> | dfsdm0 | -------> +---------------+ +-------------+ +--------+ Olivier Moysan (7): iio: introduce iio backend device of: property: add device link support for io-backends iio: adc: stm32-dfsdm: manage dfsdm as a channel provider iio: adc: stm32-dfsdm: adopt generic channel bindings iio: adc: sd_adc_modulator: change to iio backend device iio: adc: stm32-dfsdm: add scaling support to dfsdm ARM: dts: stm32: add dfsdm iio suppport arch/arm/boot/dts/stm32mp157c-ev1.dts | 62 +++++++++ drivers/iio/Makefile | 2 + drivers/iio/adc/sd_adc_modulator.c | 92 +++++++++++--- drivers/iio/adc/stm32-dfsdm-adc.c | 176 ++++++++++++++++---------- drivers/iio/industrialio-backend.c | 59 +++++++++ drivers/of/property.c | 2 + include/linux/iio/backend.h | 29 +++++ 7 files changed, 336 insertions(+), 86 deletions(-) create mode 100644 drivers/iio/industrialio-backend.c create mode 100644 include/linux/iio/backend.h -- 2.25.1
