Hi Bhavya,
> [...]
>+ mux0: mux-controller0 {
>+ compatible = "gpio-mux";
>+ #mux-state-cells = <1>;
>+ mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>;
>+ };
>+
>+ mux1: mux-controller1 {
>+ compatible = "gpio-mux";
>+ #mux-state-cells = <1>;
>+ mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
>+ };
>+
/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: mux-controller0: $nodename:0: 'mux-controller0' does not match '^mux-controller(@.*|-[0-9a-f]+)?$'
Documentation/devicetree/bindings/mux/mux-controller.yaml
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: mux-controller1: $nodename:0: 'mux-controller1' does not match '^mux-controller(@.*|-[0-9a-f]+)?$'
Please fix above dtbs_check warning
For rest
Reviewed-by: Udit Kumar <u-kumar1@xxxxxx>
> transceiver0: can-phy0 {
> /* standby pin has been grounded by default */
> compatible = "ti,tcan1042";
>--
>2.39.2
