Add Starfive JH7110 SoC USB 2.0 PHY driver support.
USB 2.0 PHY default connect to Cadence USB controller.
Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
Reviewed-by: Roger Quadros <rogerq@xxxxxxxxxx>
---
MAINTAINERS | 6 ++
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/starfive/Kconfig | 15 +++
drivers/phy/starfive/Makefile | 2 +
drivers/phy/starfive/phy-jh7110-usb.c | 150 ++++++++++++++++++++++++++
6 files changed, 175 insertions(+)
create mode 100644 drivers/phy/starfive/Kconfig
create mode 100644 drivers/phy/starfive/Makefile
create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c
diff --git a/MAINTAINERS b/MAINTAINERS
index f794002a192e..d2ce89a8d31c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20174,6 +20174,12 @@ S: Supported
F: Documentation/devicetree/bindings/watchdog/starfive*
F: drivers/watchdog/starfive-wdt.c
+STARFIVE JH71X0 USB PHY DRIVER
+M: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
+S: Supported
+F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
+F: drivers/phy/starfive/phy-jh7110-usb.c
+
STATIC BRANCH/CALL
M: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
M: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index f46e3148d286..0000149edbc4 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -91,6 +91,7 @@ source "drivers/phy/rockchip/Kconfig"
source "drivers/phy/samsung/Kconfig"
source "drivers/phy/socionext/Kconfig"
source "drivers/phy/st/Kconfig"
+source "drivers/phy/starfive/Kconfig"
source "drivers/phy/sunplus/Kconfig"
source "drivers/phy/tegra/Kconfig"
source "drivers/phy/ti/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 54f312c10a40..fb3dc9de6111 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -31,6 +31,7 @@ obj-y += allwinner/ \
samsung/ \
socionext/ \
st/ \
+ starfive/ \
sunplus/ \
tegra/ \
ti/ \
diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
new file mode 100644
index 000000000000..2283feadfc76
--- /dev/null
+++ b/drivers/phy/starfive/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for StarFive platforms
+#
+
+config PHY_STARFIVE_JH7110_USB
+ tristate "Starfive JH7110 USB 2.0 PHY support"
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this to support the StarFive USB 2.0 PHY,
+ used with the Cadence USB controller.
+ If M is selected, the module will be called
+ phy-jh7110-usb.ko.
diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
new file mode 100644
index 000000000000..52e9a09cc619
--- /dev/null
+++ b/drivers/phy/starfive/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o
diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c
new file mode 100644
index 000000000000..90d788423705
--- /dev/null
+++ b/drivers/phy/starfive/phy-jh7110-usb.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive JH7110 USB 2.0 PHY driver
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ * Author: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/usb/of.h>
+
+#define USB_125M_CLK_RATE 125000000
+#define USB_LS_KEEPALIVE_OFF 0x4
+#define USB_LS_KEEPALIVE_ENABLE BIT(4)
+
+struct jh7110_usb2_phy {
+ struct phy *phy;
+ void __iomem *regs;
+ struct clk *usb_125m_clk;
+ struct clk *app_125m;
+ enum phy_mode mode;
+};
+
+static void jh7110_usb2_mode_set(struct jh7110_usb2_phy *phy)
+{
+ unsigned int val;
+
+ if (phy->mode != PHY_MODE_USB_HOST) {
+ /* Enable the LS speed keep-alive signal */
+ val = readl(phy->regs + USB_LS_KEEPALIVE_OFF);
+ val |= USB_LS_KEEPALIVE_ENABLE;
+ writel(val, phy->regs + USB_LS_KEEPALIVE_OFF);
+ }
+}
+
+static int jh7110_usb2_phy_set_mode(struct phy *_phy,
+ enum phy_mode mode, int submode)
+{
+ struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ case PHY_MODE_USB_DEVICE:
+ case PHY_MODE_USB_OTG:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (mode != phy->mode) {
+ dev_dbg(&_phy->dev, "Changing phy to %d\n", mode);
+ phy->mode = mode;
+ jh7110_usb2_mode_set(phy);
+ }
+
+ return 0;
+}
+
+static int jh7110_usb2_phy_init(struct phy *_phy)
+{
+ struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
+ int ret;
+
+ ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy->app_125m);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int jh7110_usb2_phy_exit(struct phy *_phy)
+{
+ struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
+
+ clk_disable_unprepare(phy->app_125m);
+
+ return 0;
+}
+
+static const struct phy_ops jh7110_usb2_phy_ops = {
+ .init = jh7110_usb2_phy_init,
+ .exit = jh7110_usb2_phy_exit,
+ .set_mode = jh7110_usb2_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static int jh7110_usb_phy_probe(struct platform_device *pdev)
+{
+ struct jh7110_usb2_phy *phy;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->usb_125m_clk = devm_clk_get(dev, "125m");
+ if (IS_ERR(phy->usb_125m_clk))
+ return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk),
+ "Failed to get 125m clock\n");
+
+ phy->app_125m = devm_clk_get(dev, "app_125m");
+ if (IS_ERR(phy->app_125m))
+ return dev_err_probe(dev, PTR_ERR(phy->app_125m),
+ "Failed to get app 125m clock\n");
+
+ phy->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy->regs))
+ return dev_err_probe(dev, PTR_ERR(phy->regs),
+ "Failed to map phy base\n");
+
+ phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops);
+ if (IS_ERR(phy->phy))
+ return dev_err_probe(dev, PTR_ERR(phy->phy),
+ "Failed to create phy\n");
+
+ phy_set_drvdata(phy->phy, phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id jh7110_usb_phy_of_match[] = {
+ { .compatible = "starfive,jh7110-usb-phy" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match);
+
+static struct platform_driver jh7110_usb_phy_driver = {
+ .probe = jh7110_usb_phy_probe,
+ .driver = {
+ .of_match_table = jh7110_usb_phy_of_match,
+ .name = "jh7110-usb-phy",
+ }
+};
+module_platform_driver(jh7110_usb_phy_driver);
+
+MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver");
+MODULE_AUTHOR("Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
2.17.1
