On Wed, 14 Jun 2023 14:53:12 +0300
Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
> On Wed, Jun 14, 2023 at 1:43 PM Paller, Kim Seer
> <KimSeer.Paller@xxxxxxxxxx> wrote:
> > > From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> > > Sent: Wednesday, June 14, 2023 5:12 PM
>
> ...
>
> > > > + /* select external voltage reference source for the ADC */
> > > > + ret = max14001_reg_update(st, MAX14001_CFG,
> > > > + MAX14001_CFG_EXRF, 1);
> > > > +
> > > > + ret = regulator_get_voltage(vref);
> > > > + if (ret < 0)
> > > > + return dev_err_probe(dev, ret,
> > > > + "Failed to get vref\n");
> > >
> > > Is it important to choose the external reference source _before_ getting the
> > > voltage of the regulator? If not, I would swap these calls, otherwise the
> > > comment is needed to explain why the sequence is important in the way it's
> > > written.
> >
> > It is not important. These calls can be swap without any issues.
>
> If you send a new version, please swap, otherwise I hope Jonathan can
> do it when applying.
>
I made these changes whilst applying...
--- a/drivers/iio/adc/max14001.c
+++ b/drivers/iio/adc/max14001.c
@@ -290,16 +290,19 @@ static int max14001_probe(struct spi_device *spi)
if (ret)
return ret;
- /* select external voltage reference source for the ADC */
- ret = max14001_reg_update(st, MAX14001_CFG,
- MAX14001_CFG_EXRF, 1);
-
ret = regulator_get_voltage(vref);
if (ret < 0)
return dev_err_probe(dev, ret,
"Failed to get vref\n");
st->vref_mv = ret / 1000;
+
+ /* select external voltage reference source for the ADC */
+ ret = max14001_reg_update(st, MAX14001_CFG,
+ MAX14001_CFG_EXRF, 1);
+
+ if (ret < 0)
+ return ret;
}
mutex_init(&st->lock);
Note that whilst I've applied this to the togreg branch of iio.git - it is just
a tiny bit too late to make the merge window that starts in about a week.
As such I'll only push this out as testing until I can rebase the tree
on rc1 once available.
Thanks,
Jonathan
