The pwm-bcm2835 supports PWM polarity, so adjust the affected dtsi
files accordingly and fix the dtbs_check warning:
pwm@7e20c000: #pwm-cells:0:0: 3 was expected
Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/bcm2711.dtsi | 2 +-
arch/arm/boot/dts/bcm283x.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index d30c19311145..4a379a14966d 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -278,7 +278,7 @@ pwm1: pwm@7e20c800 {
clocks = <&clocks BCM2835_CLOCK_PWM>;
assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
assigned-clock-rates = <10000000>;
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index c9c52a19ef3b..2ca8a2505a4d 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -416,7 +416,7 @@ pwm: pwm@7e20c000 {
clocks = <&clocks BCM2835_CLOCK_PWM>;
assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
assigned-clock-rates = <10000000>;
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
--
2.34.1
