With interrupt handling fixed in the MaxLinear PHY driver, see commit
97a89ed101bb ("net: phy: mxl-gpy: disable interrupts on GPY215 by
default"), we can finally add the correct interrupt description to the
device tree.
Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>
---
arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts | 2 ++
arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 13 +++++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
index 5feef9a59a79..ad5d8b56e6fa 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -15,10 +15,12 @@ / {
&mdio0 {
phy2: ethernet-phy@3 {
reg = <3>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
};
phy3: ethernet-phy@4 {
reg = <4>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
index 2e16217ac88e..83a1c23887e7 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -49,6 +49,9 @@ spi3: spi@400 {
};
&gpio {
+ pinctrl-0 = <&phy_int_pins>;
+ pinctrl-names = "default";
+
fc3_b_pins: fc3-b-pins {
/* SCK, MISO, MOSI */
pins = "GPIO_51", "GPIO_52", "GPIO_53";
@@ -61,6 +64,12 @@ miim_c_pins: miim-c-pins {
function = "miim_c";
};
+ phy_int_pins: phy-int-pins {
+ /* PHY_INT# */
+ pins = "GPIO_24";
+ function = "gpio";
+ };
+
reset_pins: reset-pins {
/* SYS_RST# */
pins = "GPIO_56";
@@ -107,21 +116,25 @@ &mdio0 {
phy4: ethernet-phy@5 {
reg = <5>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
phy5: ethernet-phy@6 {
reg = <6>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
phy6: ethernet-phy@7 {
reg = <7>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
phy7: ethernet-phy@8 {
reg = <8>;
+ interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
};
};
--
2.30.2
