Add support for the SolidRun LX2162A System on Module (SoM), and the Clearfog evaluation board. This patch-set introduces: - dt node for lx2160a serdes block #2 - dtsi for lx2162a system on module - dts for lx2162 clearfog Firstly Please note that checkpatch was complaining about the EEPROMS: - DT compatible string "st,24c02" appears un-documented - DT compatible string "st,24c2048" appears un-documented - DT compatible string "atmel,24c2048" appears un-documented However to my eyes these *are* already documented in at24.yaml, and are also used in existing device-tree. Secondly the MAINTAINERS file has not been modified. Is it required I add myself or *someone* for these new dts? Josua Mayer (3): arm64: dts: lx2160a: describe the SerDes block #2 dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog Board arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board .../devicetree/bindings/arm/fsl.yaml | 2 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 + .../dts/freescale/fsl-lx2162a-clearfog.dts | 369 ++++++++++++++++++ .../dts/freescale/fsl-lx2162a-sr-som.dtsi | 78 ++++ 5 files changed, 456 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi Cc: Shawn Guo <shawnguo@xxxxxxxxxx> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx> Cc: Fabio Estevam <festevam@xxxxxxxxx> Cc: NXP Linux Team <linux-imx@xxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> Cc: Conor Dooley <conor+dt@xxxxxxxxxx> Cc: Li Yang <leoyang.li@xxxxxxx> -- 2.35.3
