Re: [PATCH v10 0/4] This suspend patch is only support cut off the power of cpu and some external

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 12/02/2014 09:26 AM, Kevin Hilman wrote:
Doug Anderson <dianders@xxxxxxxxxxxx> writes:

Hi,

On Mon, Dec 1, 2014 at 2:08 PM, Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
Hi,

On Mon, Dec 1, 2014 at 11:51 AM, Kevin Hilman <khilman@xxxxxxxxxx> wrote:
Chris Zhong <zyw@xxxxxxxxxxxxxx> writes:

devices, since we still lack power_domain driver, so the other power rail
of rk3288 need keep power on.
I have tested it on rk3288-evb board, atop next-20141112. goto suspend by type
"echo mem > /sys/power/state", vdd_cpu is about 0mv by measuring, so it can be
determined in sleep mode, then press power button to wakeup it.
I tested this on top of today's linux-next (next-20141201) and it
suspends, but doesn't wake up from any of the button presses.  What
wakeup sources are configured for the rk3288-evb-rk808?
Just to close the loop (I talked with Kevin over IM about this, too):

I have a huge description of how I tested this as part of my patch at
<https://patchwork.kernel.org/patch/5414941/>.  Chris:  I think Kevin
has asked you several times to include information like this in your
cover letter.  Please, please, please can you try to remember to do
this?
Talked to Chris offline.  He said that in his tests the other patches
weren't needed, so he didn't list any other patches.  Things just
worked for him.  ...so I guess he did post the instructions that
worked for him.  Sorry for the complaint.  Possibly things are
different on "next-20141112" and that's where Chris said he tested.
This series doesn't apply cleanly to next-20141112.  Manually applying
(with fuzz), it boots but I have the same results: it suspends, but none
of the buttons wake it up.

Kevin

Hi, Kevin

I have test these patches on evb board base on next-20141128 with a defconfig[0], and with u-boot[1].
As Doug said, we need below 3 patches for resume.

1.https://patchwork.kernel.org/patch/5051881/  - clocksource:
   arch_timer: Allow the device tree to specify uninitialized timer
   registers

2.https://patchwork.kernel.org/patch/5363671/  - clocksource:
   arch_timer: Fix code to use physical timers when requested

3.https://patchwork.kernel.org/patch/5382141/  - ARM: dts: rk3288: add
   arm,cpu-registers-not-fw-configured


And it will auto wakeup, as Heiko said in v8. But I have never notice before, since the u-boot never enable edp,
and I use the coreboot with edp display.
Actually it is a bug in rk3288, the rk3288 have not 27Mhz clock source, but the edp initially set to this non-existent clock. At this time, edp is working on a unknown state, and it always bring a interrupt, this interrupt avoid system enter suspend. So if we want to enter suspend normally, the edp_24m_sel(bit 15) of
CRU_CLKSEL28_CON(0xff7600d0) must be set to 1.

[0] https://github.com/mmind/linux-rockchip/blob/devel/workbench/arch/arm/configs/rk3288_defconfig
[1] https://githubremotes/origin/u-boot-rk3288

here is my local  work around:

diff --git a/arch//cpu/armv7/rk32xx/clock-rk3288.c b/arch/arm/cpu/armv7/rk32xx/clock-rk3288.c
index cfd0acd..3df0900 100755
--- a/arch/arm/cpu/armv7/rk32xx/clock-rk3288.c
+++ b/arch/arm/cpu/armv7/rk32xx/clock-rk3288.c
@@ -1233,7 +1233,6 @@ int rkclk_lcdc_clk_set(uint32 lcdc_id, uint32 dclk_hz)
        }
 }

-
 /*
  * rkplat set nandc clock div
  * nandc_id:   nandc id
@@ -1270,6 +1269,11 @@ int rkclk_set_nandc_div(uint32 nandc_id, uint32 pllsrc, uint32 freq)
        return 0;
 }

+void rkclk_init_edp_source(void)
+{
+       cru_writel(1<<15 | 1<<31, CRU_CLKSELS_CON(28));
+}
+
 /*
  * rkplat set sd clock src
  * 0: codec pll; 1: general pll; 2: 24M
diff --git a/board/rockchip/rk32xx/rk32xx.c b/board/rockchip/rk32xx/rk32xx.c
index bfdcf0e..3e19f5d 100755
--- a/board/rockchip/rk32xx/rk32xx.c
+++ b/board/rockchip/rk32xx/rk32xx.c
@@ -114,7 +114,7 @@ void rk_backlight_ctrl(int brightness)

 void rk_fb_init(unsigned int onoff)
 {
-
+       rkclk_init_edp_source();
 #ifdef CONFIG_OF_LIBFDT
        if (lcd_node == 0) rk_lcd_parse_dt(gd->fdt_blob);











--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux