SMD RPM only provides two buckets, one each for the active-only and
active-sleep RPM contexts. Use the correct constant to allocate and
operate on them.
This will make the qcom,icc.h header no longer work with this driver,
mostly because.. it was never meant to! The commit that introduced
bucket support to SMD RPM was trying to shove a square into a round
hole and it did not work out very well. That said, there are no
active users of SMD RPM ICC + qcom,icc.h, so that doesn't hurt.
Fixes: dcbce7b0a79c ("interconnect: qcom: icc-rpm: Support multiple buckets")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/interconnect/qcom/icc-rpm.c | 16 ++++++++--------
drivers/interconnect/qcom/icc-rpm.h | 6 +++---
2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 60e4eab8855a..5f3bbe7e6a0d 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -248,7 +248,7 @@ static void qcom_icc_pre_bw_aggregate(struct icc_node *node)
size_t i;
qn = node->data;
- for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+ for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
qn->sum_avg[i] = 0;
qn->max_peak[i] = 0;
}
@@ -272,9 +272,9 @@ static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
qn = node->data;
if (!tag)
- tag = QCOM_ICC_TAG_ALWAYS;
+ tag = RPM_ALWAYS_TAG;
- for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+ for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
if (tag & BIT(i)) {
qn->sum_avg[i] += avg_bw;
qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw);
@@ -299,11 +299,11 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
{
struct icc_node *node;
struct qcom_icc_node *qn;
- u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
+ u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
int i;
/* Initialise aggregate values */
- for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+ for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
agg_avg[i] = 0;
agg_peak[i] = 0;
}
@@ -316,7 +316,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
*/
list_for_each_entry(node, &provider->nodes, node_list) {
qn = node->data;
- for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+ for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
if (qn->channels)
sum_avg[i] = div_u64(qn->sum_avg[i], qn->channels);
else
@@ -327,7 +327,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
}
/* Find maximum values across all buckets */
- for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++)
+ for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++)
*max_agg_avg = max_t(u64, *max_agg_avg, agg_avg[i]);
}
@@ -338,7 +338,7 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
struct icc_provider *provider;
u64 sum_bw;
u64 active_rate, sleep_rate;
- u64 agg_avg[QCOM_ICC_NUM_BUCKETS], agg_peak[QCOM_ICC_NUM_BUCKETS];
+ u64 agg_avg[QCOM_SMD_RPM_STATE_NUM], agg_peak[QCOM_SMD_RPM_STATE_NUM];
u64 max_agg_avg;
int ret;
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
index e3b0aa9fff3e..eed3451af3e6 100644
--- a/drivers/interconnect/qcom/icc-rpm.h
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -8,7 +8,7 @@
#include <linux/soc/qcom/smd-rpm.h>
-#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
#include <linux/clk.h>
#include <linux/interconnect-provider.h>
#include <linux/platform_device.h>
@@ -106,8 +106,8 @@ struct qcom_icc_node {
u16 num_links;
u16 channels;
u16 buswidth;
- u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
- u64 max_peak[QCOM_ICC_NUM_BUCKETS];
+ u64 sum_avg[QCOM_SMD_RPM_STATE_NUM];
+ u64 max_peak[QCOM_SMD_RPM_STATE_NUM];
int mas_rpm_id;
int slv_rpm_id;
struct qcom_icc_qos qos;
--
2.41.0
