From: Maxim Kiselev <bigunclemax@xxxxxxxxx>
This patch adds a thermal sensor controller node for the D1/T113s.
Also it adds a THS calibration data cell to efuse node.
Signed-off-by: Maxim Kiselev <bigunclemax@xxxxxxxxx>
---
.../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 922e8e0e2c09..9da1e4ddb662 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -138,6 +138,19 @@ ccu: clock-controller@2001000 {
#reset-cells = <1>;
};
+ ths: thermal-sensor@2009400 {
+ compatible = "allwinner,sun20i-d1-ths";
+ reg = <0x02009400 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(58) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ status = "disabled";
+ #thermal-sensor-cells = <0>;
+ };
+
dmic: dmic@2031000 {
compatible = "allwinner,sun20i-d1-dmic",
"allwinner,sun50i-h6-dmic";
@@ -365,6 +378,10 @@ sid: efuse@3006000 {
reg = <0x3006000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@14 {
+ reg = <0x14 0x4>;
+ };
};
crypto: crypto@3040000 {
--
2.39.2
