From: Maxim Kiselev <bigunclemax@xxxxxxxxx> This patch adds a thermal sensor controller node for the D1/T113s. Also it adds a THS calibration data cell and thermal zone. Signed-off-by: Maxim Kiselev <bigunclemax@xxxxxxxxx> Signed-off-by: Maksim Kiselev <bigunclemax@xxxxxxxxx> --- .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 922e8e0e2c09..b893f3325554 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/reset/sun8i-de2.h> #include <dt-bindings/reset/sun20i-d1-ccu.h> #include <dt-bindings/reset/sun20i-d1-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; @@ -138,6 +139,19 @@ ccu: clock-controller@2001000 { #reset-cells = <1>; }; + ths: thermal-sensor@2009400 { + compatible = "allwinner,sun20i-d1-ths"; + reg = <0x02009400 0x400>; + interrupts = <SOC_PERIPHERAL_IRQ(58) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + status = "disabled"; + #thermal-sensor-cells = <0>; + }; + dmic: dmic@2031000 { compatible = "allwinner,sun20i-d1-dmic", "allwinner,sun50i-h6-dmic"; @@ -365,6 +379,10 @@ sid: efuse@3006000 { reg = <0x3006000 0x1000>; #address-cells = <1>; #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@14 { + reg = <0x14 0x4>; + }; }; crypto: crypto@3040000 { @@ -843,4 +861,12 @@ rtc: rtc@7090000 { #clock-cells = <1>; }; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + }; }; -- 2.39.2