From: Maxim Kiselev <bigunclemax@xxxxxxxxx>
This patch adds a thermal sensor controller support for the D1/T113s,
which is similar to the one on H6, but with only one sensor and
different scale and offset values.
Signed-off-by: Maxim Kiselev <bigunclemax@xxxxxxxxx>
Signed-off-by: Maksim Kiselev <bigunclemax@xxxxxxxxx>
---
drivers/thermal/sun8i_thermal.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 793ddce72132..01cc4e130892 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -628,6 +628,18 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
.calc_temp = sun8i_ths_calc_temp,
};
+static const struct ths_thermal_chip sun20i_d1_ths = {
+ .sensor_num = 1,
+ .has_bus_clk_reset = true,
+ .offset = 188552,
+ .scale = 673,
+ .temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+ .calibrate = sun50i_h6_ths_calibrate,
+ .init = sun50i_h6_thermal_init,
+ .irq_ack = sun50i_h6_irq_ack,
+ .calc_temp = sun8i_ths_calc_temp,
+};
+
static const struct of_device_id of_ths_match[] = {
{ .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
@@ -636,6 +648,7 @@ static const struct of_device_id of_ths_match[] = {
{ .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths },
{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
+ { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, of_ths_match);
--
2.39.2
