Convert the binding to DT schema format. It also updates the reset-controller description. Signed-off-by: Piyush Mehta <piyush.mehta@xxxxxxx> --- - Addressed the Krzysztof review comment: - Update DT binding to fix the dt_binding_check warning. Link: https://lore.kernel.org/lkml/168612336438.2153757.6000360498539992409.robh@xxxxxxxxxx/T/#m4abfe6287177d5fd09f781d298dd19d56aae5e27 --- .../bindings/reset/xlnx,zynqmp-reset.txt | 55 ---------------- .../bindings/reset/xlnx,zynqmp-reset.yaml | 64 +++++++++++++++++++ 2 files changed, 64 insertions(+), 55 deletions(-) delete mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt deleted file mode 100644 index ed836868dbf1..000000000000 --- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt +++ /dev/null @@ -1,55 +0,0 @@ --------------------------------------------------------------------------- - = Zynq UltraScale+ MPSoC and Versal reset driver binding = --------------------------------------------------------------------------- -The Zynq UltraScale+ MPSoC and Versal has several different resets. - -See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information -about zynqmp resets. - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required Properties: -- compatible: "xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform - "xlnx,versal-reset" for Versal platform -- #reset-cells: Specifies the number of cells needed to encode reset - line, should be 1 - -------- -Example -------- - -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - - zynqmp_reset: reset-controller { - compatible = "xlnx,zynqmp-reset"; - #reset-cells = <1>; - }; - }; -}; - -Specifying reset lines connected to IP modules -============================================== - -Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -For list of all valid reset indices for Zynq UltraScale+ MPSoC see -<dt-bindings/reset/xlnx-zynqmp-resets.h> -For list of all valid reset indices for Versal see -<dt-bindings/reset/xlnx-versal-resets.h> - -Example: - -serdes: zynqmp_phy@fd400000 { - ... - - resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; - reset-names = "sata_rst"; - - ... -}; diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml new file mode 100644 index 000000000000..a39b17599e05 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/xlnx,zynqmp-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zynq UltraScale+ MPSoC and Versal reset binding + +maintainers: + - Piyush Mehta <piyush.mehta@xxxxxxx> + +description: | + The Zynq UltraScale+ MPSoC and Versal has several different resets. + + The PS reset subsystem is responsible for handling the external reset + input to the device and that all internal reset requirements are met + for the system (as a whole) and for the functional units. + + Please also refer to reset.txt in this directory for common reset + controller binding usage. Device nodes that need access to reset + lines should specify them as a reset phandle in their corresponding + node as specified in reset.txt. + + For list of all valid reset indices for Zynq UltraScale+ MPSoC + <dt-bindings/reset/xlnx-zynqmp-resets.h> + + For list of all valid reset indices for Versal + <dt-bindings/reset/xlnx-versal-resets.h> + +properties: + compatible: + enum: + - xlnx,zynqmp-reset + - xlnx,versal-reset + + "#reset-cells": + const: 1 + +required: + - compatible + - "#reset-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/xlnx-zynqmp-resets.h> + + firmware { + zynqmp_firmware: zynqmp-firmware { + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; + }; + }; + + /* Specifying sata reset control of devices */ + sata { + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; + reset-names = "sata_rst"; + }; + +... -- 2.25.1
