Il 09/06/23 10:30, Chen-Yu Tsai ha scritto:
Some of the LDO regulators in the MT6358/MT6366 have sparsely populated voltage tables, supported by custom get/set operators. While it works, it requires more code and an extra field to store the lookup table. These LDOs also have fine voltage calibration settings that can slightly boost the output voltage from 0 mV to 100 mV, in 10 mV increments. These combined could be modeled as a pickable set of linear ranges. The coarse voltage setting is modeled as the range selector, while each range has 11 selectors, starting from the range's base voltage, up to +100 mV, in 10mV increments.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
