RDP433 has the support for SPI NOR, add the support for it. Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx> --- Note: This patch was part of initial submission https://lore.kernel.org/linux-arm-msm/20230329053726.14860-1-quic_kathirav@xxxxxxxxxxx/ however this got missed in between, so sending it across again. arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts index 2b3ed8d351f7..31ee19112157 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -48,6 +48,20 @@ }; }; +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + &sdhc_1 { pinctrl-0 = <&sdc_default_state>; pinctrl-names = "default"; @@ -96,6 +110,13 @@ bias-pull-down; }; }; + + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; }; &xo_board_clk { -- 2.17.1
