Re: [PATCH 1/9] dt-bindings: display: Add yamls for JH7110 display subsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/06/2023 09:40, Keith Zhao wrote:
> Add bindings for JH7110 display subsystem which
> has a display controller verisilicon dc8200
> and an HDMI interface.
> 
> Signed-off-by: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
> ---
>  .../display/verisilicon/starfive-hdmi.yaml    |  93 +++++++++++++++
>  .../display/verisilicon/verisilicon-dc.yaml   | 110 ++++++++++++++++++
>  .../display/verisilicon/verisilicon-drm.yaml  |  42 +++++++
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  MAINTAINERS                                   |   7 ++
>  5 files changed, 254 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/verisilicon/starfive-hdmi.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/verisilicon/verisilicon-dc.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/verisilicon/verisilicon-drm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/verisilicon/starfive-hdmi.yaml b/Documentation/devicetree/bindings/display/verisilicon/starfive-hdmi.yaml
> new file mode 100644
> index 000000000000..c30b7954a355
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/verisilicon/starfive-hdmi.yaml

Filename matching compatible.

> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/verisilicon/starfive-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive HDMI transmiter
> +
> +description:
> +  The StarFive SoC uses the HDMI signal transmiter based on innosilicon IP
> +  to generate HDMI signal from its input and transmit the signal to the screen.
> +
> +maintainers:
> +  - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
> +  - ShengYang Chen <shengyang.chen@xxxxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: starfive,hdmi

Conor already commented on this.

> +
> +  reg:
> +    minItems: 1
> +
> +  interrupts:
> +    items:
> +      - description: The HDMI hot plug detection interrupt.
> +
> +  clocks:
> +    items:
> +      - description: System clock of HDMI module.
> +      - description: Mclk clock of HDMI audio.
> +      - description: Bclk clock of HDMI audio.
> +      - description: Pixel clock generated by HDMI module.
> +
> +  clock-names:
> +    items:
> +      - const: sysclk
> +      - const: mclk
> +      - const: bclk
> +      - const: pclk
> +
> +  resets:
> +    items:
> +      - description: Reset for HDMI module.
> +
> +  reset-names:
> +    items:
> +      - const: hdmi_tx
> +
> +  '#sound-dai-cells':
> +    const: 0
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description:
> +      Port node with one endpoint connected to a display connector node.

One port, so how do you get data? From where does it come?

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - '#sound-dai-cells'
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    hdmi: hdmi@29590000 {
> +      compatible = "starfive,hdmi";
> +      reg = <0x29590000 0x4000>;
> +      interrupts = <99>;
> +      clocks = <&voutcrg 17>,
> +               <&voutcrg 15>,
> +               <&voutcrg 16>,
> +               <&hdmitx0_pixelclk>;
> +      clock-names = "sysclk", "mclk","bclk","pclk";
> +      resets = <&voutcrg 9>;
> +      reset-names = "hdmi_tx";
> +      #sound-dai-cells = <0>;
> +      hdmi_in: port {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +          hdmi_input: endpoint@0 {
> +            reg = <0>;
> +            remote-endpoint = <&dc_out_dpi0>;

Mixed up indentation.

> +          };
> +      };
> +    };
> diff --git a/Documentation/devicetree/bindings/display/verisilicon/verisilicon-dc.yaml b/Documentation/devicetree/bindings/display/verisilicon/verisilicon-dc.yaml
> new file mode 100644
> index 000000000000..1322502c4cde
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/verisilicon/verisilicon-dc.yaml

Same problem.

> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/verisilicon/verisilicon-dc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive display controller
> +
> +description:
> +  The StarFive SoC uses the display controller based on Verisilicon IP
> +  to transfer the image data from a video memory
> +  buffer to an external LCD interface.
> +
> +maintainers:
> +  - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
> +  - ShengYang Chen <shengyang.chen@xxxxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: verisilicon,dc8200
> +
> +  reg:
> +    maxItems: 3
> +
> +  interrupts:
> +    items:
> +      - description: The interrupt will be generated when DC finish one frame
> +
> +  clocks:
> +    items:
> +      - description: Clock for display system noc bus.
> +      - description: Pixel clock for display channel 0.
> +      - description: Pixel clock for display channel 1.
> +      - description: Clock for axi interface of display controller.
> +      - description: Core clock for display controller.
> +      - description: Clock for ahb interface of display controller.
> +      - description: External HDMI pixel clock.
> +      - description: Parent clock for pixel clock
> +
> +  clock-names:
> +    items:
> +      - const: clk_vout_noc_disp

Why do you need "clk_" prefixes? Drop.


> +      - const: clk_vout_pix0
> +      - const: clk_vout_pix1
> +      - const: clk_vout_axi
> +      - const: clk_vout_core
> +      - const: clk_vout_vout_ahb
> +      - const: hdmitx0_pixel
> +      - const: clk_vout_dc8200
> +
> +  resets:
> +    items:
> +      - description: Reset for axi interface of display controller.
> +      - description: Reset for ahb interface of display controller.
> +      - description: Core reset of display controller.
> +
> +  reset-names:
> +    items:
> +      - const: rst_vout_axi

Drop rst_

> +      - const: rst_vout_ahb
> +      - const: rst_vout_core
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description:
> +      Port node with one endpoint connected to a hdmi node.

Oh really? But your HDMI does not allow it! Submit DTS user of all this
so we can see it.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    dc8200: dc8200@29400000 {

Node names should be generic. See also explanation and list of examples
in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +      compatible = "verisilicon,dc8200";
> +      reg = <0x29400000 0x100>,
> +            <0x29400800 0x2000>,
> +            <0x295B0000 0x90>;

Lowercase hex

> +      interrupts = <95>;
> +      clocks = <&syscrg 60>,
> +               <&voutcrg 7>,
> +               <&voutcrg 8>,
> +               <&voutcrg 4>,
> +               <&voutcrg 5>,
> +               <&voutcrg 6>,
> +               <&hdmitx0_pixelclk>,
> +               <&voutcrg 1>;
> +      clock-names = "clk_vout_noc_disp", "clk_vout_pix0", "clk_vout_pix1", "clk_vout_axi",
> +                    "clk_vout_core", "clk_vout_vout_ahb", "hdmitx0_pixel","clk_vout_dc8200";
> +      resets = <&voutcrg 0>,
> +               <&voutcrg 1>,
> +               <&voutcrg 2>;
> +      reset-names = "rst_vout_axi","rst_vout_ahb","rst_vout_core";
> +      dc_out: port {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +          dc_out_dpi0: endpoint@0 {
> +              reg = <0>;
> +              remote-endpoint = <&hdmi_input>;
> +          };
> +      };
> +    };
> diff --git a/Documentation/devicetree/bindings/display/verisilicon/verisilicon-drm.yaml b/Documentation/devicetree/bindings/display/verisilicon/verisilicon-drm.yaml
> new file mode 100644
> index 000000000000..aed8d4af2c55
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/verisilicon/verisilicon-drm.yaml

Same comments

> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/verisilicon/verisilicon-drm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Verisilicon DRM master device

What is DRM? If Linux thingy, then it does not suit bindings.

Give it proper description of hardware.

> +
> +maintainers:
> +  - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
> +  - ShengYang Chen <shengyang.chen@xxxxxxxxxxxxxxxx>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  The Verisilicon DRM master device is a virtual device needed to list all

We do not describe virtual devices in bindings.

NAK.

> +  display controller or other display interface nodes that comprise the
> +  graphics subsystem.
> +
> +properties:
> +  compatible:
> +    const: verisilicon,display-subsystem
> +
> +  ports:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array

Ports is an object, not array. Drop entire property. It's just wrong.


Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux