PN547/553, QN310/330 chips on some devices require a pad supply voltage
(PVDD). Otherwise, the NFC won't power up.
Implement support for pad supply voltage pvdd-supply that is enabled by
the nxp-nci driver so that the regulator gets enabled when needed.
Signed-off-by: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
---
drivers/nfc/nxp-nci/i2c.c | 47 +++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
index d4c299be7949..e2d16111daa4 100644
--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -35,6 +35,7 @@ struct nxp_nci_i2c_phy {
struct gpio_desc *gpiod_en;
struct gpio_desc *gpiod_fw;
+ struct regulator *pvdd;
int hard_fault; /*
* < 0 if hardware error occurred (e.g. i2c err)
@@ -263,6 +264,22 @@ static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = {
{ }
};
+static void nxp_nci_i2c_poweroff(void *data)
+{
+ struct nxp_nci_i2c_phy *phy = data;
+ struct device *dev = &phy->i2c_dev->dev;
+ struct regulator *pvdd = phy->pvdd;
+ int r;
+
+ if (!IS_ERR(pvdd) && regulator_is_enabled(pvdd)) {
+ r = regulator_disable(pvdd);
+ if (r < 0)
+ dev_warn(dev,
+ "Failed to disable regulator pvdd: %d\n",
+ r);
+ }
+}
+
static int nxp_nci_i2c_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
@@ -298,6 +315,34 @@ static int nxp_nci_i2c_probe(struct i2c_client *client)
return PTR_ERR(phy->gpiod_fw);
}
+ phy->pvdd = devm_regulator_get_optional(dev, "pvdd");
+ if (IS_ERR(phy->pvdd)) {
+ r = PTR_ERR(phy->pvdd);
+ if (r != -ENODEV) {
+ if (r != -EPROBE_DEFER)
+ dev_err(dev,
+ "Failed to get regulator pvdd: %d\n",
+ r);
+ return r;
+ }
+ } else {
+ r = regulator_enable(phy->pvdd);
+ if (r < 0) {
+ nfc_err(dev,
+ "Failed to enable regulator pvdd: %d\n",
+ r);
+ return r;
+ }
+ }
+
+ r = devm_add_action_or_reset(dev, nxp_nci_i2c_poweroff, phy);
+ if (r < 0) {
+ nfc_err(dev, "Failed to install poweroff handler: %d\n",
+ r);
+ nxp_nci_i2c_poweroff(phy);
+ return r;
+ }
+
r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops,
NXP_NCI_I2C_MAX_PAYLOAD, &phy->ndev);
if (r < 0)
@@ -319,6 +364,8 @@ static void nxp_nci_i2c_remove(struct i2c_client *client)
nxp_nci_remove(phy->ndev);
free_irq(client->irq, phy);
+
+ nxp_nci_i2c_poweroff(phy);
}
static const struct i2c_device_id nxp_nci_i2c_id_table[] = {
--
2.30.2
